User Guide

AVerTV 6
59
4.10 Removing Unwanted Channels
If you want to exclude undesirable channels from your channel list, do the following:
1. Click the Setup button and in the Setup dialog box, click Analog TV or
Programs icon on the left pane.
2. Click Advance located in the lower right corner of the
Program Information section. Then the Advance dialog
box will appear.
3. In the Program Information section, select the unwanted
channel and then click Delete. This channel will be
removed and that means you won’t be able to access these
programs anymore.
(This picture is only for reference.)
OR,
If you just want to skip a certain channel, do the following:
1. First, select the unwanted channel in the Program Information section.
2. Clear the Enable check box so that you will not access that channel when
you press Channel Up/Down buttons.
3. However, you can still see the channel in your program list. If you want to watch that
channel again at some point, just select the Enable check box.
4.11 Using the OverScan Function
On some broadcast channels, you might see distorted
lines or black spaces on the top, sides, or bottom of the
screen. These video artifacts device from the source
signal, and can be masked using the OverScan feature.
To hide the edges of the picture:
z Right-click on the TV Monitor and choose
OverScan to have it enable it.
OR,
z Click the Setup button and in the Setup
dialog box, click Analog TV or Programs icon
on the left pane. Enable Overscan and specify an appropriate number (0~50) to
get better quality.