User manual

AVerTV 6

3.2.3 Scanning for Digital Satellite Programs

1. Select Digital TV on the left pane of the Setup dialog box.

(This picture is only for reference.)

2. Choose the switch type that is used by your satellite system.

3. From the Satellite drop-down list under Input 1, choose the correct satellite. If you

cannot find the satellite you want but the input port DOES receive satellite signals,

choose Custom…. Otherwise, choose None.

4. Click Edit to configure the satellite information.

5. In the Satellite Information dialog box, type in the satellite’s name in the Satellite box.

(This picture is only for reference.)

6. Specify the frequencies that you want to scan for available satellite programs.

There are two ways to do this: