User`s manual

AVerMedia Hybrid TVBox 11
ENG-10
3. Use CH▲ or CH▼ buttons to highlight the “Component Output”.
4. Press Vol◄ or Vol► on the remote to select a desired video output resolution.
5. Press OK button to save the change.
4.3.8 Factory Default
This feature allows you to revert to default factory settings
1. Press the MENU button to display the menu.
2. Press the CH▲ or CH▼ to select the “Setup” menu and press Vol►/OK.
3. Press the CH▲ or CH▼ to select the “Factory Default” and press Vol►/OK.
4. A confirmation dialog will appear. Use Vol◄ or Vol► buttons to select “OK ” and press OK button to
confirm the operation, or select “Cancel” and press OK button to exit the dialog.
4.4 Channel Menu
4.4.1 Setup the TV Source
1. Press the MENU button to display the menu.
2. Press the CH▲ or CH▼ to select the “Channel” menu
and press Vol►/OK.
3. Use the CH▲ or CH▼ buttons to select “TV Source” and
Press Vol►/OK.
4. Use CH▲ or CH▼ buttons to highlight a TV source
(Antenna, Cable-STD, Cable-HRC, Cable-IRC) and press
Vol►/OK.
4.4.2 Channel scan
1. After finishing setting TV source, press the MENU button to display the menu.
2. Press the CH▲ or CH▼ to select the “Channel” menu and press Vol►/OK.
3. Press the CH▲ or CH▼ to select the “Auto Program” and press Vol►/OK.
4. A warning message will appear.
5. If you want to overwrite the previous program list, use Vol◄ or Vol► buttons to highlight “OK
” and press OK
button. To abort this operation, simply select
“Cancel” and press OK button.
4.4.3 Show /Hide Channels
After scanning, available channels will then be listed. Now you can
hide the unwanted programs by check the check box beside each
channel.
1. Press the CH▲ or CH▼ to select the “Channel” menu and
press Vol►/OK.
2. Press the CH▲ or CH▼ to select the “Show /Hide
Channels” and press Vol►/OK.
3. Use CH▲ or CH▼ buttons to highlight a listed channel and
press Vol►/OK. The mark
will appear, indicating that the
channel has been hidden.
4. If you want to hide more channels, repeat step 3.