User's Manual
Table Of Contents
- How to View
- Switching of Functions
- RECentral4_UM-2_page 7-12_proofreading-DONE.pdf
- RECentral4_UM-3_page 13-18_proofread-DONE.pdf
- RECentral4_UM-5_page 25-30_proofread-DONE.pdf
- Step 1: Select the Single Mode (Single)
- Step 2: Select/ Set the Capture Device
- Step 3: Set the Streaming
- How to Set the Live Streaming Platform, Streaming Quality
- How to Set Codec
- Detailed description of Codec: See page 16.
- Step 4: Set the Automatic Recording Function
- Step 5: Set the Sound
- Step 6: Start and Stop Streaming
- RECentral4_UM-6_page 31-36_proofread-DONE.pdf
- RECentral4_UM-7_page 37-42_proofread-DONE.pdf
- RECentral4_UM-9_page 49-54_proofread-DONE.pdf
- RECentral4_UM-10_page 55-60_proofread-DONE.pdf
- RECentral4_UM-11_page 61-66_proofread-DONE.pdf
- RECentral4_UM-12_page 67-72_proofread-DONE.pdf
- RECentral4_UM-13_page 73-78_proofread-DONE.pdf
- RECentral4_UM-14_page 79-84_proofread-DONE.pdf
- RECentral4_UM-15_page 85-90_proofread-DONE.pdf
- RECentral4_UM-16_page 91-96_proofread-DONE.pdf
- RECentral4_UM-17_page 97-102_proofread-DONE.pdf
10 / 91
Step 2: Select / Edit Capture Device
Select your capture device on the list of connected capture devices. You can edit the device
by clicking the “pen” icon.
※ Notes:
・ If the capture device is not connected properly, or if the driver for this capture device is not installed
correctly, the capture device will not be recognized by RECentral
・ When you use Single Mode, only capture devices can be used. Webcams are not supported in Single Mode.
Edit Capture Device
※ Notes: The items to be edited may vary depending on the functions and specifications of
the capture device.
Specify / Set the source (capture device)
Below is an example of the capture device setup.
1
Source (Capture Device)
Switch to the connected capture device and select the source from the
drop-down list
2
Re-detect the capture device and update the status.
3
Select which terminal to be used for video output from game machine or
the video device that you are using. Select either “HDMI” or
“component”
Input
(※ When a device has both HDMI and component input
terminals, this item is shown.)
4 Name
Click on the name shown on the source list to change.
Edit Capture Device
Refresh