Quick Installation Guide 1 Package Contents Quick Installat ion Guide de allation Gui Quick Inst EZMaker 7 → DVD AVerMedia C039 English Slovenský Magyar a Slovenčin Polski Česky и Българск Русский а Українськ Türkçe Hrvatski AVerMedia® DVD EZMaker 7 CyberLink DVD Suite CD 2 Quick Installation Guide Installation CD System Requirements Intel® Pentium® 4, 2.4 GHz or higher or equivalent AMD processor. 512 MB RAM or above USB 2.
3 Hardware Installation Connecting AVerMedia DVD EZMaker 7 Use the figure below to connect your AVerMedia DVD EZMaker 7. To record video with sound, you need to specify the audio input source and make sure the sound is NOT muted and have enough volume. To do this, double-click the yellow speaker volume icon on the taskbar or click Start, point to Programs > Accessories > Entertainment and then click Volume Control.
Quick Installation Guide 4 Installing the Driver After you have properly installed your AVerMedia DVD EZMaker 7, turn on your computer. The system will automatically detect the newly installed device on the first time you reboot your computer. Simply skip the wizard, and insert the accompanying installation CD to install the driver. Important notice : BEFORE installing the driver, make sure your system has DirectX 9.0c or above installed.
Windows® Vista 1. The “Found New Hardware Wizard” dialog box will appear. Just click Cancel to skip the Wizard installation procedures. 2. Place the installation CD into the CD-ROM drive. 3. When the “AutoPlay” dialog box appears, select Run Autorun.exe. 4. When the installation main screen appears, choose Install Driver. 5. If the “User Account Control” dialog box appears, select Allow to continue the process. Windows® 7 1. Place the installation CD into the CD-ROM drive. 2.
Quick Installation Guide 5 Installing CyberLink PowerDirector and CyberLink PowerProducer 1. After you have completed installing the driver, you can install CyberLink PowerDirector to edit the video or install CyberLink PowerProducer to make movie disc. Or install PhotoNow! to automatically and manually adjust images. 2. Eject the installation CD from your CD-ROM drive and insert the CyberLink DVD Suite CD. The installation main screen will appear. 3.
Windows® Vista / Windows® 7 1. Click on the START button and go to Control Panel. 2. Double-click Programs and Features icon. 3. Select AVerMedia C039 USB Capture Card and click on the Uninstall/Change button.
Schnellinstallationsanleitung 1 Packungsinhalt Quick Installat ion Guide de allation Gui Quick Inst EZMaker 7 → DVD AVerMedia C039 English Slovenský Magyar a Slovenčin Polski Česky и Българск Русский а Українськ Türkçe Hrvatski AVerMedia® DVD EZMaker 7 CyberLink DVD Suite CD 2 Schnellinstallationsanleitung Installations-CD USB Kabel Hardware installieren Intel® Pentium® 4, 2.4 GHz oder höherer gleichwertiger AMD Prozessor 512MB RAM oder mehr USB 2.
3 Systemanforderungen Anschließen des AVerMedia DVD EZMaker 7 Schließen Sie den AVerMedia DVD EZMaker 7 entsprechend der folgenden Abbildung an. Um Video mit Sound aufzuzeichnen muß die Audioquelle eingeschaltet sein, und über einen entsprechend starken Signalpegel verfügt. Hierzu gehen Sie mit Doppelklick auf das gelbe Lautsprechericon der Taskleiste oder klicken auf Start, zeigen auf Programme > Zubehör > Unterhaltungsmedien und klicken dann auf Lautstärkeregelung.
Schnellinstallationsanleitung 4 Installation des Treibers Nachdem Sie den AVerMedia DVD EZMaker 7 installiert haben, starten Sie Ihren Rechner. Das System sucht automatisch nach dem neu installierten Gerät wenn Sie das erste Mal Ihren Computer hochfahren. Überspringen Sie einfach den Hilfsassistenten und legen Sie die beiliegende CD ein, um den Treiber zu installieren. WICHTIGER HINWEIS: BEVOR Sie die Treibersoftware installieren, muss DirectX 9.0c oder höher installiert sein.
Windows® Vista 1. Die Dialogbox “Assistent für das Suchen neuer Hardware” erscheint. Klicken Sie auf Abbrechen, um den Installationsassistenten zu beenden. 2. Legen Sie die Installations-CD in Ihr CD-ROM-Laufwerk ein. 3. Wenn die “AutoPlay” Anwendung erscheint, wählen Sie Run Autorun.exe. 4. Wenn das Installationsfenster erscheint, wählen Sie Install Driver. 5. Wenn das “Nutzer Zugangskontrolle” Fenster erscheint, wählen Sie „Zulassen“ um fortzufahren. Windows® 7 1.
Schnellinstallationsanleitung 5 Installieren von CyberLink PowerDirector und CyberLink PowerProducer 1. Wenn die Treiber erfogreich installiert wurden, können Sie CyberLink PowerDirector zur Videobearbeitung oder CyberLink PowerProducer zur Erstellung von Film-CDs bzw. DVDs installieren. PhotoNow! ist für die automatische und manuelle Bildbearbeitung. 2. Entnehmen Sie die Installations CD aus Ihrem CD Laufwerk und legen Sie die “CyberLink DVD Suite” ein. Die Installationsoberfläche erscheint. 3.
Windows® Vista / Windows® 7 1. Klicken Sie auf die Schaltfläche START und öffnen Sie die Control Panel (Systemsteuerung). 2. Doppelklicken Sie auf das Symbol Programs and Features (Programme und Funktionen). 3. Wählen Sie AVerMedia C039 USB Capture Card und klicken Sie dann auf die Schaltfläche Uninstall/Change (Deinstallieren/Ändern).
Guide d’installation rapide 1 Contenu de l’emballage Quick Installat ion Guide de allation Gui Quick Inst EZMaker 7 → DVD AVerMedia C039 English Slovenský Magyar a Slovenčin Polski Česky и Българск Русский а Українськ Türkçe Hrvatski AVerMedia® DVD EZMaker 7 CyberLink DVD Suite CD 2 Guide d’installation rapide CD d’installation Configuration minimale requise Intel® Pentium® 4, 2.4 GHz ou supérieur ou processeur AMD équivalent. 512Mo RAM ou plus Port USB 2.
3 Installation du matériel Connecter AVerMedia DVD EZMaker 7 Suivez le schéma ci-dessous pour connecter votre AVerMedia DVD EZMaker 7. Pour enregistrer une vidéo avec du son, vous devrez spécifier l'entrée audio source et vérifiez que le son n'est pas sur muet, et avoir suffisamment de volume. Pour cela, double-cliquez sur l’icône jaune du volume haut-parleur, dans la barre des tâches, ou cliquez sur Démarrer, pointez sur Programmes > Accessoires > Divertissement, puis cliquez sur Réglage du son.
Guide d’installation rapide 4 Installation du pilote Après avoir installé correctement votre AVerMedia DVD EZMaker 7, allumez votre ordinateur. Le système détecte automatiquement le périphérique nouvellement installé la première fois que vous réinitialisez votre ordinateur. Passez l’assistant d’installation et insérez directement le CD d’installation accompagnant le produit pour installer le pilote. Important : AVANT d’installer le pilote, assurez-vous que DirectX 9.
Windows® Vista 1. La boîte de dialogue “Assistant du nouveau matériel trouvé” apparaît. Cliquez simplement sur Annuler pour passer les procédures d’installation de l’assistant. 2. Placez le CD d’installation dans votre lecteur CD-ROM. 3. Lorsque la boîte de dialogue “AutoPlay” apparaît, sélectionnez Run Autorun.exe. 4. Lorsque l’écran d’installation apparaît, choisissez Install Driver. 5. Si la boîte de dialogue “Paramètres du Compte Utilisateur” apparaît, choissisez “Autoriser” pour continuer la procedure.
Guide d’installation rapide 5 Installer CyberLink PowerDirector et CyberLink PowerProducer 1. Après avoir terminé l’installation du pilote, vous pouvez installer CyberLink PowerDirector pour éditer des fichiers vidéo ou installer CyberLink PowerProducer pour créer des films sur disque. Ou bien installez PhotoNow! pour ajuster automatiquement ou manuellement les images. 2. Ejectez le CD-ROM d’installation depuis votre lecteur de CD-ROM et insérez le CD de la suite logicielle Cyberlink DVD.
Windows® Vista / Windows® 7 1. Cliquez sur le bouton DEMARRER et aller au Panneau de configuration. 2. Double-cliquez sur l’icône Programmes et fonctions. 3. Sélectionnez AVerMedia C039 USB Capture Card et cliquez sur le bouton Désinstaller/Changer.
Guida di installazione rapida 1 Contenuto della confezione Quick Installat ion Guide de allation Gui Quick Inst EZMaker 7 → DVD AVerMedia C039 English Slovenský Magyar a Slovenčin Polski Česky и Българск Русский а Українськ Türkçe Hrvatski AVerMedia® DVD EZMaker 7 CyberLink DVD Suite CD 2 Guida di installazione rapida CD di installazione Cavo USB Requisiti di sistema Processore Intel® Pentium® 4, 2,4 GHz o superiore, o equivalente processore AMD. 512MB RAM oder mehr Porta USB 2.
3 Installazione dell’Hardware Collegamento di AVerMedia DVD EZMaker 7 Per collegare AVerMedia DVD EZMaker 7 consultare l’illustrazione in basso. Per registrare i video con audio, è necessario specificare la fonte di ingresso audio e assicurarsi che l'audio non sia disattivato e abbiano un volume sufficiente. Fate doppio clic sull’icona dell’altoparlante giallo dalla barra delle applicazioni o fate clic su avvio, scegliete programmi > accessori> svago e quindi fate clic su comandi volume.
Guida di installazione rapida 4 Installazione del driver Dopo avere installato in modo appropriato AVerMedia DVD EZMaker 7, accendere il computer. Al primo riavvio, il sistema rileverà automaticamente la nuova periferica appena installata. Ignorare la procedura guidata ed inserire il CD d’installazione fornito in dotazione per installare il driver. AVVISO Important: PRIMA di installare il driver, verificare che sul sistema sia installato DirectX 9.0c o superiore.
Windows® Vista 1. Appare la finestra di dialogo “Installazione guidata nuovo hardware”. Basta fare clic su Annulla per ignorare le procedure di installazione guidate. 2. Inserite il CD di installazione nell’unità CD-ROM. 3. Quando appare la finestra di dialogo “AutoPlay” (Esecuzione automatica), selezionare Run Autorun.exe (Esegui Autorun.exe). 4. Quando lo schermo principale dell'installazione compare, scelga Install Driver. 5.
Guida di installazione rapida 5 Installazione di CyberLink PowerDirector e CyberLink PowerProducer 1. Al termine dell’installazione del driver, potrete installare CyberLink PowerDirector pere montare il video o installare CyberLink PowerProducer e creare un disco del film. O Installare automaticamente “PhotoNow!” e regolare manualmente le immagini. 2. Estrarre il CD d’installazione dall’unità CD-ROM ed inserire il CD CyberLink DVD Suite. Compare la schermata principale dell’installazione. 3.
Quick Installation Guide Quick Installation Guide AVerMedia® DVD EZMaker 7 C039 English Deutsch Français Italiano Español Português P/N 300AC039-DBS Made in Taiwan
Guía de instalación rápida 1 Contenido del paquete Quick Installat ion Guide de allation Gui Quick Inst EZMaker 7 → DVD AVerMedia C039 English Slovenský Magyar a Slovenčin Polski Česky и Българск Русский а Українськ Türkçe Hrvatski AVerMedia® DVD EZMaker 7 CyberLink DVD Suite CD 2 Guía de instalación rápida Guía de instalación rápida Cable USB Requisitos del Sistema Intel® Pentium® 4, 2.4 GHz o superior o procesador AMD equivalente. 512 MB de RAM o superior. Puerto USB 2.
3 Instalación del Hardware Conectar AVerMedia DVD EZMaker 7 Utilice la imagen siguiente para conectar su AVerMedia DVD EZMaker 7. Para grabar video con sonido, usted necesita especificar la fuente de entrada de audio y estar seguro que el sonido NO está en modo Silencio y con bastante nivel de volumen. Para hacerlo, pulse dos veces en el icono del altavoz de la barra de tareas o pulse Inicio y vaya a Programas > Accesorios > Entretenimiento y pulse Control de volumen.
Guía de instalación rápida 4 Instalación del Controlador Después de conectar AVerMedia DVD EZMaker 7 a un puerto USB 2.0 disponible, su ordenador deberá automáticamente detectar el nuevo dispositivo. Simplemente salte el asistente e inserte el CD de instalación facilitado, y ejecute la instalación desde el CD. AVISO Importante: ANTES de instalar el controlador, asegúrese de que su sistema tenga instalado DirectX 9.0c o superior.
Windows® Vista 1. Aparecerá el “Asistente de Nuevo Hardware encontrado”. Simplemente presione Cancelar para omitir el asistente de instalación. 2. Ponga el CD de instalación en su unidad de CD-ROM. 3. Cuando aparezca el cuadro de diálogo de “reproducción automática” (“Autoplay”), seleccione ejecutar Autorun.exe. 4. Cuando la pantalla principal de instalación aparezca, elija Install Driver. 5. Si el cuadro de diálogo “control de cuentas de usuario” aparece, seleccione Permitir para continuar el proceso.
Guía de instalación rápida 5 Instalación de CyberLink PowerDirector y CyberLink PowerProducer 1. Cuando haya terminado de instalar el controlador, puede instalar CyberLink PowerDirector para editar los videos o instalar CyberLink PowerProducer para crear discos de video. O instale PhotoNow! para ajustar automática y manualmente las imágenes. 2. Extraiga el CD de instalación del CD-ROM e inserte el CD CyberLink DVD Suite. Aparecerá la pantalla principal de instalación. 3.
Quick Installation Guide FCC NOTICE (CLASS B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Statement NOTE- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Guia de Instalação Rápida 1 Conteúdo do Pacote Quick Installat ion Guide de allation Gui Quick Inst EZMaker 7 → DVD AVerMedia C039 English Slovenský Magyar a Slovenčin Polski Česky и Българск Русский а Українськ Türkçe Hrvatski AVerMedia® DVD EZMaker 7 CD CyberLink DVD Suite 2 Guia de Instalação Rápida CD de instalação Cabo USB Requisitos do Sistema Processador Intel® Pentium® 4, 2,4 GHz ou superior ou AMD equivalente. 512 MB ou mais de RAM Porta USB 2.
3 Instalação do Hardware Ligação do AVerMedia DVD EZMaker 7 Utilize a figura em baixo para ligar o AVerMedia DVD EZMaker 7. Para gravar vídeo com som, é necessário especificar a respectiva fonte de entrada de som e assegurar que o mesmo NÃO foi silenciado e dispõe de volume suficiente. Para o efeito, clique duas vezes no ícone do altifalante amarelo da barra de tarefas ou clique em Iniciar, aponte para Programas>Acessórios>Entretenimento e depois clique em Controlo do volume.
Guia de Instalação Rápida 4 Instalação do Controlador Após instalar correctamente o AVerMedia DVD EZMaker 7, ligue o computador. O sistema detecta automaticamente o novo hardware instalado aquando do arranque do computador. Salte o Assistente de Instalação e insira o CD de instalação para instalar o controlador. NOTA IMPORTANTE: ANTES de instalar o controlador, certifique-se de que o seu sistema tem instalado o DirectX 9.0c ou superior.
Windows® Vista 1. Aparecerá a caixa de diálogo “Assistente para adicionar novo hardware”. Clique em Cancelar para ignorar o assistente de instalação. 2. Coloque o CD de instalação na unidade do CD-ROM. 3. Quando surgir a caixa de diálogo “AutoPlay” seleccione Run Autorun.exe.(Executar Autorun.exe.) 4. Quando visualizar o ecrã principal, escolha Install Driver (Instalar Controlador). 5.
Guia de Instalação Rápida 5 Instalação do software CyberLink PowerDirector e CyberLink PowerProducer 1. Após concluir a instalação do controlador, poderá instalar o software CyberLink PowerDirector para editar vídeo ou o software CyberLink PowerProducer para criar discos de filmes. Poderá ainda instalar o PhotoNow! para proceder ao ajuste automático e manual das imagens. 2. Retire o CD de instalação da unidade de CD- ROM e insira o CD com o software CyberLink DVD Suite.
DISCLAIMER No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its quality, performance, merchantability, or fitness for a particular purpose. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice.