User manual

47
(12) Login
Enable the conditions in Login section you want the system to automatically carry out.
- Auto Login after system boot up
Execute the DVR when the operating system is started.
- Auto Record after system boot up
Automatically start video recording when the DVR is executed.
- Auto start Network after system boot up
Automatically start network connection when the DVR is executed.
- Default user
Automatically log in to the selected default user when the DVR is executed.
(13) Date and Time Setting
Adjust the DVR system time and date. Click Setting to select the month, date, hour, and minute.
Mark Daylight saving check box to enable daylight saving function. And then, select the Start and End
Date/Time by click Setting.
Daylight Bias: Assign a time that it is for daylight saving time offset in your time zone. For example: if the time
zone is in U.S. Eastern, the time offset is 1 hour.
(14) Firmware
 Product Version Update: Upgrading the firmware of DVR system.
1. Save the firmware on root directory of USB pen drive. And then, plug USB pen drive to DVR server.
2. Click Update button, a Firmware Upgrade windows will show up.
CPU usage
status
Click X to
close the
display.