User Manual

English - 27
selected partition; indicates low write
speed of selected partition. To make sure
recording functions properly, be sure to
select partition with normal write speed.
Step 2:
Use ▲/▼ to select the preferred
default storage device.
Step 3:
Use ▲/▼ to select a folder and
press OK to confirm.
Step 4:
Press F1 to save the setting.
OSD Menu
Descriptions
A/V Management
Use ▲/▼ to move among options.
Press OK to confirm.
A/V Pass Through:
Use ▲/▼ to enable/disable A/V
Pass Through. Press OK to
confirm.
*The default setting is set Off to yield to the
power-saving regulation. If this function is
enabled, Capture Box still output signal when
the Capture Box is off. If this function is
disabled, Capture Box does not output signal
when the Capture Box is off.