User manual

14
2.1.3.2 To Set Preset Position
User can set 9 preset positions for PTZ camera. Using
1
to
9
button to set the
preset position.
1. Press
PTZ
and camera channel number button (
1 2 3 4
)
to enter PTZ
mode.
2. Using
▲
,
▼
,
▼
and
▼
to adjust the PTZ camera to the position that user
wants.
3. Press any number button over 3 seconds and the position will be saved.
4. To move the PTZ camera to preset position, just press the number button.
2.1.3.3 To Control PTZ Camera
To move, adjust focus, and zoom in/out camera lens can be done by using some function
buttons on the remote control.
▼
To move the PTZ camera lens to the right
▼
To move the PTZ camera lens to the left
▲
To move the PTZ camera lens to go up
▼
To move the PTZ camera lens to go down
ZOOM+
To zoom in PTZ camera
ZOOM-
To zoom out PTZ camera
SPEED-
To speed down movement of PTZ camera lens
SPEED+
To speed up movement of PTZ camera lens
FOCUS +
To focus in PTZ camera lens
FOCUS -
To focus out PTZ camera lens
2.2 Using the DVR for the First Time
Upon connecting the power, the unit automatically detects the status of the hard disk. The
hard disk must be formatted before user can use it with EB1304NET SATA. If you are
prompt to format the hard disk, press (select) for
YES
to format the hard disk and
(menu) for
NO
to remain unchanged.