User manual

20
OSD MENU Description
RECORD SCHEDULE
00 : 00 - 01 : 00
01 : 00 - 02 : 00
02 : 00 - 03 : 00
05 : 00 - 06 : 00
06 : 00 - 07 : 00
07 : 00 - 08 : 00
08 : 00 - 09 : 00
09 : 00 - 10 : 00
10 : 00 - 11 : 00
11 : 00 - 12 : 00
12 : 00 - 13 : 00
04 : 00 - 05 : 00
03 : 00 - 04 : 00
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
RECORD SCHEDULE
By default, in 24 hours, the recording schedule is set to always
record every hour. Refer to the table below to customize the
recoding condition
Condition Description
NO REC Disable video recording
ALWAYS REC Record non-stop
MOTION REC Start recording when any movement is detected
SENSOR REC Start recording when the sensor has triggered
BUTTON REC Start recording when the record button is pressed
ON
ON
OFF
NO
SUBMENU
PASSWORD CHANGE
VIDEO ADJUSTMENT
AUTO RECORD
AUTO SCAN
PASSWORD SETUP
AUDIO RECORD
AUDIO MUTE
NTSC
OFF
1
VIDEO SYSTEM
MUTIPLE REMOTE
REMOTE ID
PTZ SETUP
CHANNEL NAME SETTING
S3. 01. 01. 00. 03
TIME SETUP
PASSWORD CHANGE
Set a security combination number. There are two type of user
password – SUPERUSER and USER.
PASSWORD SETUP
SUPERUSER
USER(NETWORK)
Use the number button on the remote control to enter the
password. Or use
▲
and
▼
button to the select the
security combination number. Press
or
▼
button to
confirm.
SUPERUSER
Superuser has the authority of formatting hard disk, changing
system settings, remote monitor the DVR system and changes
the system settings. The factory default password is 111111.
PASSWORD SETUP
CURRENT
NEW
CONFIRM