User manual

24
OSD MENU Description
000
PELCO-D
2400
1-1
PTZ SETUP
CAMERA
PTZ CONTROL
PTZ ID
PROTOCOL
BAUD RATE
AUTO PAN
05 SEC
DWELL TIME
1
OFF
PROTOCOL
Select the protocol of PTZ camera. The protocol will be
differenced that depends on the brand of PTZ camera. The
DVR system currently supports 2 protocols ─ PELCO-D and
PELCO-P. Please refer to your PTZ camera user manual to
make sure which protocol is using for.
BAUD RATE
To setup the baud rate of PTZ camera. For more detail, please
refer to your PTZ camera’s user manual.
AUTO PAN
Select the preset number to assign an auto move direction for
the PTZ camera. For example: 1-3 means the PTZ camera will
auto move from preset position 1, 2 and 3.
DWELL TIME
Set a time that how long the IP PTZ camera stays in that
position before it moves to the next one.
CH01
CH02
CH03
CH04
CHANNEL NAME SETTING
CHANNEL 1 NAME
CHANNEL 2 NAME
CHANNEL 3 NAME
CHANNEL 4 NAME
CHANNEL NAME SETTING
User can define name of each channel. Channel name can be 7
digit long that include A~Z, 0~9, space, and dash (-).