User manual

40
Chapter 8 Using the Remote Programs
User can use Microsoft Internet Explorer to access DVR system by entering the IP address.
To use this feature, make sure that you PC and EB 1304 NET both are connected to the
internet and the Network feature is enabled.
Accessing this feature for the first time you will be prompted by your browser to install
WebCamX.cab, allow the installation and you should be able to connect and login
afterwards. For Windows 2000, click Yes when the Security Warning dialog box appears.
For Windows XP, click Install when the Internet Explorer - Security Warning dialog box
appears.
After installing the WebCamX.cab and when connecting to the DVR system, you are
required to enter User ID (Superuser or User) and password (default password is 111111)
and select the type of network. Superuser has the authority to remote setup the DVR
system configuration on Web Viewer.
i
- If user can not connect to DVR server, it might be the IP address of DVR server is
conflict with IP address of any PC at network. Please contact the manager of DVR
server to reconfigure IP address of DVR server. Please reconnect with DVR server
again when the IP address conflict is solved
- Changing the Superuser and User default password is strongly recommended.