User manual

62
9.1.3 To Use the PDAViewer
1. Run the PDAViewer in the Programs.
2. Familiarizing the PDAViewer buttons.
(7)
(6)
(5)
(3)
(4)
(8)
(9)
(10)
(1)
(2)
Name Function
(1) Connect Hook up to the DVR server. Make sure you are connected to internet.
When the iView screen appears, click Add to add DVR server.
Enter the server IP, port, user ID, password and select the connection type.
Then, click OK.
User can playback the recorded video from remote DVR server in
PDAviewer.(see Chapter 9.1.4
)
(2) Split Screen Mode
Select between 2 screen display types. It also allows you to switch and view
different camera number or channels.
(3) About Display the PDA-Viewer software version.
(4) Minimize Reduce the size to taskbar.
(5) Exit Close the PDA-Viewer.
(6) Focus Adjust the focus of PTZ camera to produce clear image.
(7) Full Screen Use the entire screen to only display the video.
(8) Snapshot Capture and save the screen shot in *.bmp format.
(9) Zoom Zoom in and out the PTZ camera image.
(10) Direction buttons Adjust and position the focal point of the PTZ camera.