User manual

AVerTV 6
13
The time setting will be displayed on the TV monitor. For details, please see the
description below.
Time setting mode Description
Sleep 30/60/90/120 Minute(s) Your computer will go into the selected mode in
30/60/90/120 minutes.
Now Your computer will go into the selected mode in about 10
seconds.
Channel Name / No. Your computer will return to original settings.
Note: The system will detect if your VGA card supports DXVA. If yes, enable the
“DXVA Support” to activate the video acceleration of the VGA card. To watch
HDTV, it is strongly recommended to execute “DXVA Support”.
3.10 Setting time for turning on the Application
If your product with a remote control, this function allows you to turn on the application
at a preset time.
1. Press the Wake Up button (the green one) on the remote control.
2. A dialog box will be displayed on the center of the screen.
3. Set the time you want by pressing the Wake Up button continuously. (For more
information, please refer to the table below.) Then the application will be turned on
automatically at the time you want.
Description
Cancel Wake Up Disable the Wake Up function.
Wake Up after
30/60/90/120 min(s)
The application will be turned on in 30/60/90/120
minutes.