User manual

English-53
Daylight Saving Time :
Use ▲/▼ to enable/disable Daylight Saving
Time. Press OK to confirm.
*To use this function, a network connection is required.
OSD Menu
Descriptions
Disk Management
Storage Destination
Step 1:
Select and press OK to change your current
desired default storage device for both
recorded files and snapshots.
*
indicates normal write speed of selected partition;
indicates low write speed of selected partition. To
make sure recording functions properly, be sure to select
partition with normal write speed.
Step 2:
Use ▲/▼ to select the preferred default
storage device.
Step 3:
Use ▲/▼ to select a folder and press OK to
confirm.
Step 4:
Press F1 to save the setting.
OSD Menu
Descriptions
A/V Management