User manual

27
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is activated.
Beside the Send to CMS check box, click Detail. In the CMS Setting, select the camera to
enable/disable sending the video to CMS. Enable All to select all cameras. Then, click OK to
accept the new settings and Cancel to exit without saving.
3.6 Using the MiniCenter PTZ Camera Controller
(4)
(5
)
(3) (2) (1)
Name Function
(1) AutoPan Operate the PTZ cameras automatically based on the selected camera
group preset position number.
(2) Focus +/- Adjust the focus manually to produce clearer image.
(3) Zoom +/- Zoom in and out the image.
(4) Direction
buttons
Adjust and position the focal point of the PTZ camera.
(5) Camera preset
position number
Move the PTZ camera to the preset point.