User manual

32
4.6 Familiarizing the Buttons in PTZ Camera Controller
(1)
(11)
(2)(3)(4)(5)
(6)
(7)
(8) (9) (10)
Name Function
(1) Close Exit PTZ camera controller.
(2) Setup Configure PTZ cameras.(also see Chapter 4.13)
(3) AutoPan Operate the PTZ cameras automatically based on the selected camera
group preset position number.
(4) Focus +/- Adjust the focus manually to produce clear image.
(5) Zoom +/- Zoom in and out the image.
(6) Direction buttons Adjust and position the focal point of the PTZ camera.
(7) Camera ID pane Display the PTZ camera number that is being operated.
(8) Save Camera
preset position
Save the PTZ camera preset position number. Select the camera and click
the preset position number and save it.
(9) Camera lens
speed controller
Adjust the moving s1peed of the PTZ camera lens.
(10) Camera preset
position number
Move the PTZ camera to the preset point.
(11) Group AutoPan Select to automatically operate PTZ camera in group.