® AVerDiGi SEB5108/5116 series SEB5108 Lite/SEB5116 Lite/SEB5116+ Quick Installation Guide
i SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK.
Content Table Package Contents ...................................................................... 1 SEB5108 Lite .......................................................................... 1 SEB5116 Lite .......................................................................... 1 SEB5116+ ................................................................................ 2 Optional Accessories............................................................... 2 Hardware Installation ...........................
Package Contents SEB5108 Lite (1) (5) (2) (6) (4) (3) (8) (7) (1) SEB51108 Lite unit (6) Power Cord ( The power cord varies (2) Quick Installation Guide depending on the standard power outlet of (3) Software CD (User Manual included) the country where it is sold) (4) AVerMedia USB optical mouse (7) SATA cable x 2 (5) Power adaptor (8) Screws for HDD installation SEB5116 Lite (1) (5) (2) (6) (4) (3) (8) (7) (1) SEB5116 Lite unit (6) Power Cord ( The power cord varies (2) Quick Ins
SEB5116+ (1) (2) (6) (5) (4) (3) (8) (7) (1) SEB5116+ unit (6) Power Cord ( The power cord varies (2) Quick Installation Guide depending on the standard power outlet of (3) Software CD (User Manual included) the country where it is sold) (4) AVerMedia USB optical mouse (7) SATA cable x 2 (5) Power adaptor (8) Screws for HDD installation i If there is any damage, shortage or inappropriate item in the package contents, please contact with local dealer Optional Accessories DVI cable for SE
Hardware Installation A. Install the hard disk Follow the steps to install the hard disk: For hard disk spec, please referring to i http://www.avermedia.com/AVerDiGi/Product/ → AVerDiGi EB Series → + AVerDiGi SEB5116 or SEB5116 Lite or AVerDiGi 5108 Lite → Hardware Recommendations The “compatible hard disks” indicated in the above recommendation list only means that these commercially available hard disks were tested with AVerMedia® products and functioned well under normal operation conditions.
3. Loosen the screws of holder to make hard 4. Loosen all the screws of hard disk plate. disk install more easily. 5. The hard disk plate can be installed up to 6. Turn the plate and hard disk over carefully 3 hard disks. User can choose the position and secure the hard disk on the plate. If and place the hard disk on it. hard disk cannot be fit to the screw hole, then, you may adjust the hard disk position to fit the screw hole. The power adaptor now only guarantees to support 2 HDD.
7. Screw tight the plate within hard disk 8. Plug the power cable into hard disk inside the DVR unit 9. Plug the SATA cable into SATA connector 10. Plug another side of SATA cable into hard disk on the PC board 11. Screw the holder 12. Push the cover forward and secure the cover 13. You may now connect all the cables and power on the DVR unit.
B. Device Connection SEB5108 Lite i – All connected devices have their own power supply are necessary. – Pen drive and external hard disk must be FAT32 format.
SEB5116 Lite i – All connected devices have their own power supply are necessary. – Pen drive and external hard disk must be FAT32 format.
SEB5116+ i – All connected devices have their own power supply are necessary. – Pen drive and external hard disk must be FAT32 format.
Fist Time to Use DVR System 1. Connect the cameras 2. Connect the mouse to DVR unit(through USB port on front panel) 3. Power on the DVR unit. 4. The preset screen (color bar) will show up and wait for preview screen to display (about 60 seconds). 5. When preview screen show up, please wait for the authorization dialog pop-up.
b. Click System → System and click Next. c. Click Refresh button to detect the installed hard disk. d. Select the hard disk that user wants to format it. e. And then, click Format to start formatting. 7. Setup the date and time in order to have correct system time and date. Following the below steps to setup date and time: and select System → System tab and click Next. a. Click b. In Time section, click Setting button of System Time. c. Select the date and adjust the time, and then, click OK.
8. Setup the Schedule to record. a. Click → Setting → Schedule → System b. Select the date and type of record (Weekly, Month, or None). c. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and hours table. d. Click Save. e. Click Record tab. f. Select the record mode (Always, Motion, Sensor, or Smart) and date.
g. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and hours table. a. Click Save and OK to complete the record schedule setting. 9. To start recording, click (record) button. Using the Virtual Keyboard Use the Virtual Keyboard and mouse to configure the DVR system. Just click or select the column and right-click to call out the virtual keyboard. For uppercase, click Caps button. To exit, click left-click anywhere on screen.
Familiarizing the Buttons in Preview Mode (SEB5116 series) Name Function (1) Login Click to select reboot the DVR system or re-login in different account. (2) Status Display recording date and time (3) Hard disk capacity Display the hard disk usage of capacity (4) Record Start/stop video recording. i To start recording, user need to setup record schedule. Click > Schedule > Record tab. And then, select the record mode (Always, Motion, Sensor, or Smart) and date.
To Playback the Recorded File To switch in Playback mode, click (Playback) button at the bottom right corner of Preview mode user interface. And then, select the date, hour, and minute that user wants to playback from Calendar Search. Click OK to start playback.
Familiarizing the Buttons in Playback Mode (SEB5116 series) Name Function (1) Status Display the recorded date, time and playback speed. (2) Playback Control ı : Move at the beginning of the recorded video file. ı: Go back to the previous frame. : Play the recorded video file at the speed of 1/2X, 1/4X, 1/8X, or 1/16X. : Wind back the recorded video file. : Briefly stop playing the recorded video file. : Play the recorded video file.
Playback Backup Video You can playback the backup files and output video segment by using QPlayer applications on the PC. When you back up the recorded file, QPlayer applications are automatically included in the backup folder. With QPlayer, it is the same as in Playback mode and supports 6 different split screen types to view all the video at the same time. The only difference is that there are no Preview and Playback buttons.
Name Function (3) Hour Buttons Select and click to playback the recorded video file on the specific time frame. i The Hour buttons represent the time in 24-hour clock. The blue bar on top of the hour button indicates that there is a recorded video file on that period of time. While the red bar indicates that you are currently viewing the recorded video file. (4) Playback Control Buttons From left to right order: Begin: Move at the beginning of the recorded video file.
Name (11) Segment Function Keep a portion of the recorded video. Following the below steps to Cut and Save the Wanted Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to start the cut. Then, click Segment to set the begin mark. 2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to end the cut. Then, click Segment to set the end mark.
Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature, make sure that your PC and DVR server both are connected to the internet and the Network feature is enabled. Accessing this feature for the first time you will be prompted by your browser to install WebCamX.cab, allow the installation and you should be able to connect and login afterwards. Click to install ActiveX if your PC required to be installed.
20
Familiarizing the WebViewer Buttons Right-clicking on the WebViewer video screen, enables you to start video recording, change video quality, switch camera and enable/disable DirectDraw. Name (1) DirectDraw i Function Enhance the video quality. Not all graphic cards can support this function. If you can not see the screen display correctly or screen is messed, please check with VGA card vendor. (2) Received file size Indicate the size of the data being sent per second.
(9) Remote setup Name Function Change the DVR server settings (10) PTZ Control Initiate PTZ camera controller (11) Snapshot Capture and save the screen shot in *.bmp format. (12) Full screen Use the entire area of the screen to only display the video. To return, Right-click or press ESC on the keyboard. Select to the view camera from different server. In Select Camera dialog box, Display column, click to enable/disable viewing the camera.
P/N: 300AC2A9-C55 March.
