NIGHT VISION HD INDOOR / OUTDOOR IP CAMERA User Manual
High Definition Network Dome Camera Operations Manual Manual Edition 32336AA – OCTOBER 2013 ©2013, AvertX All Rights Reserved No part of this document may be reproduced by any means, electronic or mechanical, for any purpose, except as expressed in the Software License Agreement. AVERTX shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice.
IMPORTANT SAFEGUARDS 1. Read Instructions Read all of the safety and operating instructions before using the product. 2. Retain Instructions Save these instructions for future reference. 3. Attachments / Accessories Do not use attachments or accessories unless recommended by the appliance manufacturer as they may cause hazards, damage product and void warranty. 4. 5. Installation Do not place or mount this product in or on an unstable or improperly supported location.
REGULATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This symbol on the product or on its packaging indicates that this product shall not be treated as household waste in accordance with Directive 2002/96/EC.
CAUTION .
TABLE OF CONTENTS INTRODUCTION .............................................................................................................................................................................................................................. 8 Overview .................................................................................................................................................................................................................. 8 Product Features .................
Logout ............................................................................................................................................................................................................. 23 Logging In as a Different User.................................................................................................................................................................. 23 FOUR: SPECIFICATIONS ...............................................................................
INTRODUCTION OVERVIEW The HD80 Night Vision HD Indoor/Outdoor IP camera is capable of providing real time streaming video with smooth image quality. The HD80 offers quad streaming and can be used in a variety of installations including shops, stores, banks, factories and for building surveillance. With Power over Ethernet (PoE), the need for separate power lines is eliminated and cabling and installation costs can be significantly reduced.
ONE: GETTING STARTED Box Contents Camera Overview 32335AA 9
BOX CONTENTS CAMERA OVERVIEW Before proceeding, please check that the box contains the items listed here. If any item is missing or has defects, DO NOT install or operate the product and contact your dealer for assistance. Before installing or connecting the dome camera, please refer to this section and complete preparations for dome setup and all switch settings.
Dimensions Connections The HD80 uses Power over Ethernet (PoE) to power the camera. The only connection on the camera is the RJ45 Ethernet dongle located on the rear of the camera. Connect one end of the Ethernet cable to the RJ45 dongle, then connect the other end of the Ethernet cable to your HDIP Recorder. 3.6” (91.44 mm) Ø4.6” (116.8 mm) Diameter – 4.625” (117.5 mm) Height – 1.75” (44.
TWO: CAMERA FINDER 12
AVERTX IP FINDER Use the included IP Finder software to easily find your network cameras for initial setup. The AvertX IP Finder software is included on the CD with all AvertX IP devices. Default Username and Password The username and password are case sensitive. It is strongly recommended that the password be changed after the initial setup to prevent unauthorized access. Username – admin Password – 1234 Finding IP Cameras 1. Open the Software CD on the recorder. 2.
THREE: SETUP AND CONFIGURATION Connecting to the Camera Viewer Software 14
CONNECTING TO THE CAMERA 1. Locate the camera on the IP Finder list. 2. Double-click the camera to open the Viewer software in your web browser. 3. Log in to the camera with the appropriate User Name and Password. Connecting a Stream AvertX IP cameras are optimized for use with AvertX HDIP recorders, but you can also connect to your AvertX IP cameras using third party software like VLC media player (http://www.videolan.org). To connect the camera you may need to provide the stream URL.
Connecting Over the Internet There are some challenges with connecting to AvertX IP cameras over WAN (internet) connections because the camera streams video over RTSP. RTSP is an excellent protocol for media and is now used on many IP cameras (including AvertX) as the default streaming option. However, RTSP is not suitable for transmission between two locations that are behind different routers. In this case, the client (for example, the AvertX HDIP recorder) connects to the camera, then requests a stream.
Viewer Tabs Home Home – Monitor live video. Setup – Set the host name , root password, and network related settings, modify the video resolution, adjust the Camera parameters, set Motion Detection options, and view and update the camera software. Logout – Change user. Note For advanced management options, access the camera’s admin panel by adding “/admin” after the camera’s IP address in your browser’s address bar. Select the video stream you want to view (H.264-1 or H.264-2).
Network Setup System System You can choose to use a fixed IP address or a dynamic IP address (assigned by a DHCP server or router) for the camera. Get IP address automatically (DHCP) Admin Password To change the administrator password, type a new password in the Admin Password box and confirm below. Note The camera comes preconfigured with a fixed IP address, selecting Get IP address automatically requires a router or DHCP server to assign an IP address to the camera.
When using static IP address to log in to the IP Camera, you can access it either through the AvertX IP Finder software or type the IP address directly in the Address bar of your internet browser. Streaming On the Streaming tab, you can configure specific video resolution, video compression mode, and video protocol and audio transmission mode. General • IP address – The IP Address is necessary for network identification. • Subnet mask – Used to determine if the destination is in the same subnet.
Video Rotation You can change the orientation of the video output if necessary. • Normal transmits the image as the camera sees it. • Flip transmits the image backwards and upside down. • Mirror transmits a mirror image. • 180 degree transmits the image upside down. Camera You can adjust your picture quality on either stream using the Camera section of the Setup tab. Select the video stream you want to adjust (H.264-1 or H.264-2). There are three options for viewing video:.
Motion Detection Picture You can adjust these values as necessary for your installation. • Brightness • Sharpness • Saturation • Hue • Contrast Motion Detection allows the camera to detect motion and trigger alarms when the motion level in the detected area exceeds the determined sensitivity threshold value. Wide Dynamic Range (WDR) Your camera includes Digital Wide Dynamic Range.
When motion detection is activated, the Motion pop-up window will open. Software Upgrade Use the Software Upgrade page to view the current version of camera software, and upgrade the software if necessary. When motion is detected, the signals will be displayed on the Motion window as shown below. Motion Detection Turn motion detection on or off. The default setting is Off.
Upgrading the Camera Viewer Software Note Make sure the new firmware file is available before starting a software upgrade. Do not change the file name, or the system will not be able to update to the new firmware. 1. Click Browse and select the firmware file. 2. Select the file type from the list under Step 2. 3. Click Upgrade. The system will check the upgrade file, and then upload the file. The upgrade status bar will display on the page.
FOUR: SPECIFICATIONS 24
CAMERA SPECIFICATIONS Image Sensor Sony Exmor IMX036 White Balance Manual / AWB IP Rating IP66 Auto White Balance Range 2700 K – 8000 K Wide Dynamic Range Digital Wide Dynamic Range Backlight Compensation Yes Minimum Illumination 0 Lux w/ IR LED Operating Temperature 18˚F ~ 118˚F (-8˚C ~ 48˚C) Day / Night Yes (True Day/Night), IR Cut Filter Heater No Resolution 1080p [1920 x 1080 / 2MP], Power Consumption 9.3W 1280 x 1024 (1.3 MP) Input Voltage PoE Only Weight 0.
www.avertx.com 1-855-2AvertX © 2013 AvertX All rights reserved. No part of this publication may be reproduced by any means without written permission from AvertX. The information in this publication is believed to be accurate in all respects. However, AvertX cannot assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
