User's Manual

11/04 Rev. 3.01-01 OPERATOR / SERVICE MANUAL Safety
All Printers
5
Machine operating safety
Appropriate use
Thermotransfer label printers are designed for printing label material, using
the thermal or thermal transfer printing process. It is possible to use a wide
range of label materials and thermal transfer ribbons, which must both be
supplied in shape of rolls.
The actual stipulated usage is detailed in the technical specifications of the
respective devices.
P For details refer to topic section „Specifications“ in the user manual of the
printer.
Avery Dennison assumes no liability for damage due to improper use of the
printer.
Protect against injuries that can result from electrical
current
Protect against injuries that can result from mechanical
actions
WARNING!
The printer is connected with the mains supply! Contact with energised
components can result in life-endangering currents through the body as
well as burns.
« Only put the machine into operation when installed in a correctly installed
housing.
« The housing may only be removed by trained personnel when the machine
is de-energised.
« Pull out the mains power connection plug from the socket before cleaning
and maintenance.
« In case fluids penetrate into the machine interior, immediately switch off the
machine and disconnect or plug out from the mains power supply.
WARNING!
Risk of injury during maintenance work due to moving or rapidly rotating
parts! The following regulations always apply:
«
Keep long hair, loose garments, jewellery etc. away from rotating parts of the
printer.
« Switch off the machine before performing mechanical adjustment tasks.