User Manual

Classification: Avery Dennison – Public Printing Labels 3-1
PRINTING LABELS
This chapter explains how to
♦ print labels
♦ scan barcodes
♦ print test labels.
Note: Before printing, your System Administrator may need to adjust the print contrast or print
position. Refer to the System Administrator’s Guide for more information. Your printer
may have a custom application that automatically sets these values.
Printing
Solid black print cannot exceed 30% of any given square inch of the supply. Use a fully
charged battery for printing. When and how you print depends on your printer’s application. It
may print
♦ only after you press a certain key
♦ automatically as soon as you squeeze the trigger
♦ automatically with no input from you
♦ one label or a strip of labels
♦ after you scan a barcode.
About RFID Supplies
RFID requires special settings to program (encode) the inlay. Your System Administrator
should use the RFID Printer Setup Utility to determine the settings and enter them in the Printer
Settings Application. Refer to the System Administrator’s Guide for more information.
Note: Printing over the RFID inlay causes printing irregularity and may impact bar code print
quality.
Entering Data
If your application requires you to enter data, the printer displays the standard keyboard.
Depending on your application, data may be entered or scanned.
3