User's Guide

12
When printing on non-RFID supplies, you may also see a label with an
overstrike pattern. Do not use that label. When using “overstrike” as the
Error Action, the format prints on the non-RFID label, but there is no
format printed on the RFID label.
Note: The RFID printer pauses while programming the RFID tag.
3. Remove the printed labels. If the printer will be unused for extended periods of
time, we recommend leaving the printhead unlatched.
Universal Serial Bus (USB) Information
This printer has a USB Version 2.0 communications port and is compatible with
Version 1.1. Drivers are available for a variety of operating systems. These
drivers provide a Virtual Communications Port (VCP), which looks like a normal
serial port (for example, COM1-4). After installing the drivers, change the
communications port to the one allocated by the VCP driver. For these drivers, go
to our Web site (www.paxar.com).
Menu Changes
Some changes were made to the menu structure for RFID. These menus should
only be accessed by your System Administrator. Refer to the RFIDMP (Multi-
Protocol) Application Notes or the HF (High Frequency) Application Notes available
on our Web site for more information.
RFID Overstrike
Non- RFID Overstrike