User Manual

2
Feed/Cut: Prints a label in the on-demand mode, feeds a blank label if there
is no print job, prints a label with error information that is useful
to your System Administrator if an error is displayed, cuts the
supply when pressed and held for two seconds if a knife is
installed.
Enter/Pause: Pauses the current print job or resumes a paused print job.
Selects the displayed menu item.
Escape/Clear: When an error is present, clears the error. When a job (batch) is
printing, cancels the print job (batch). Enters the offline menu
mode or returns the display to the next higher menu.
Å Displays the previous menu item.
Æ Displays the next menu item.
Å and Æ Prints a test label when you press the buttons at the same time.
Hold for one second and release.
Loading Labels or Tags
1. Open the cover.
2. Unlock the printhead by turning the retaining latch.
3. Lift printhead assembly using the printhead tab until the assembly locks into
place.
4. Place the roll of supply on the supply holder. For labels, the supply unrolls
from the top or the bottom. For tags, make sure the supply unrolls from the
bottom, because tag rolls are wound face in. Do not pick up the printer by
the supply holder.
Printhead
Tab
Deflector
Tab