Specifications
Users Manual Model 686 / 686 HT Control Panel Operation •
••
• 37
Pressing the MODE / Down Arrow key will take the user to the "DOT SHIFT"
screen. Pressing the EXIT / Up Arrow key will take the user back to the "HOME"
screen.
D
O
T
S
H
I F
T
V
A
L
U
E
:
±
X
X
N
E
W
V
A
L
U
E
:
±
Y
Y
This screen follows the "CHANGE CUT POSITION" screen. This screen allows the
print position to be adjusted in the WEB direction. The <YES / NO> buttons are
used to change the new shift value. The value is displayed in a positive / negative
format. The value ranges for XX and YY can be from a -16 to a +16 dots. Pressing
ENTER will change the CURRENT DOT SHIFT value to the NEW DOT SHIFT
value. A more positive number will move the print to the front while a more
negative number will move the print to the back.
Pressing the MODE / Down Arrow key will take the user back to the "PRINT
CHECK OUT FORMAT" screen. Pressing the EXIT / Up Arrow key will take the
user back to the "HOME" screen.
PRINTHEAD SETUP
P
R
E
S
S
E
N
T
E
R
F
O
R
P
R
I N
T
H
E
A
D
S
E
T
U
P
This screen follows the "PRINT / CUT POSITIONS" screen. Pressing ENTER will
take the user to the "PRINTHEAD SETUP" screens. Pressing the MODE / Down
Arrow key will take the user to the "CALIBRATING SENSORS" screen. Pressing
the EXIT / Up Arrow key will take the user back to the "HOME" screen.
C
H
A
N
G
E
S
T
R
O
B
E
V
A
L
U
E
:
±
X
X
N
E
W
V
A
L
U
E
:
±
Y
Y
This screen is the first screen under "PRINTHEAD SETUP" screen. This screen
allows the user to adjust the strobe. The <YES / NO> buttons are used to change the
new value. The value is displayed in a positive / negative format. The value ranges
for X and Y can be from a -7 to a +7. Pressing ENTER will change the CURRENT
STROBE value to the NEW STROBE value. A more positive number will make the
print darker while a more negative number will make the print lighter.
Pressing the MODE / Down Arrow key will take the user to the "CHANGE HEAD
CATEGORY" screen. Pressing the EXIT / Up Arrow key will take the user back to
the "HOME" screen.
H
E
A
D
C
A
T
E
G
O
R
Y
V
A
L
U
E
:
±
X
X
N
E
W
V
A
L
U
E
:
±
Y
Y
This screen follows the "CHANGE STROBE" screen. The screen allows the user to
enter the head category. The <YES / NO> buttons are used to change the new head
category value. The value ranges from 1 to 8. Pressing ENTER will change the
CURRENT HEAD category value to the NEW HEAD value. See the section
“PRINTHEAD REPLACEMENT” for instructions for setting the head category.
Pressing the MODE / Down Arrow key will take the user back to the "CHANGE
STROBE" screen. Pressing the EXIT / Up Arrow key will take the user back to the
"HOME" screen.