Specifications

68 •
••
• Electrical Drawings Users Manual Model 686 / 686 HT
Motherboard Power Connectors
The power supply connector on any PC/XT or PC/AT compatible motherboard is made up of dual six-pin male connectors.
Two female connectors from the power supply plug directly onto these male connectors. The following diagrams illustrate
the proper method of attaching the connectors.
Ensure that all of the black wires are located next to each other in the center of the two connectors (as shown in the diagram
below), and that the clamps on the backside of the connectors ate secured along the PCB header. All pins should be covered.
Warning: Connecting the power supply incorrectly may cause irreversible (unwarranted) damage! Ensure that the power is
turned off before connecting the power supply. Make certain that the 115 / 230VAC fuse drawer is in the correct
position.