Specifications

Users Manual Model 686 / 686 HT Customer Responsibility •
••
• 7
Customer Responsibility
Location of Printer
The printer weighs approximately 57 Lbs (~26Kg) and requires a table of sufficient
quality and strength to handle this load while the printer is operating. AVERY
DENNISON recommends an industrial type worktable having the approximate
dimensions of 96" wide to 30" deep to 32" high. (See Figure 1).
Figure 1 - Recommended Workstation Layout.
The location of the AVERY DENNISON 686 / 686 HT printer should be based on
human factors. The printer should be located in an area that maintains optimum flow
of your product while providing for the operator’s comfort. AVERY DENNISON
has taken significant steps to ensure that the operator controls and operations are
easily accessible. This goal can only be met, however, if the printer is also located
with human factors in mind. These include the height of the printer, the space
around the printer, and the accessibility to the printer.
The AVERY DENNISON 686 / 686 HT printer is a high-resolution thermal printer.
While AVERY DENNISON has designed the printer to be reasonably quiet, it is
recommended to locate the printer in an area where printing and cutting repetitious
noise is acceptable.
The unit should always be operated with the cover closed to minimize the amount of
dust and dirt in the printer.