Spec Sheet

Standard Features
Dimensions:
Height: 5.9” (152mm)
Width: 3.97” (101mm)
Depth: 2.87” (73mm)
Weight
1.30 lbs (0.59 kg)
Shipping Weight
1.52 lbs (0.69 kg)
Printing Method:
Thermal Direct
Printhead
1.89” (48mm); 203 DPI (8 dots/mm)
Memory:
8MB RAM, 16MB Flash
One-Dimensional Bar codes:
UPCA +2/+5, UPCE +2/+5, EAN8
+2/+5, EAN13 +2/+5, EAN 128,
Interleaved 2 of 5, Extended Code 39,
Codabar (NW7), Code 128, Code 93,
Postnet, GS1 Databar (RSS or
Composite Code)
Two-Dimensional Bar codes:
PDF417, MaxiCode, Aztec, QR Code
(Quick Response), Datamatrix
Standard Fonts:
7 resident bitmap fonts with point sizes of
12 to 48 points; 1 scalable font (Arial type
font 5 to 90 point)
TrueType™ Fonts:
Downloadable TrueType fonts supported –
thousands available
Font Rotation:
Fonts rotated at 0, 90, 180, 270 degrees
Avery Dennison Retail Branding and Information Solutions
www.rbis.averydennison.com
0702SNG.ENGV01.0212LT.APP
FPO
Price Management
Avery Dennison
®
9485
Portable Printer
9485 Portable Printer
Sensing Method:
Black mark and die cut
Display
10 character mono-graphic LCD white
backlit display, 128 x 64 dots
Display size: 1.3” x .7” (34mm x 17.5mm)
Printer Control Languages
MPCL II or CPCL compatible
Printer Warranty:
One (1) year parts and labor.
Printhead Warranty:
One (1) million inches (25,400M) or six (6)
months, whichever occurs rst.
Battery and Cable Warranty
Three (3) months pro-rated from date of
shipment. Physical damage to the batteries
or cables will not be covered by the limited
warranty.
Supplies
Only Avery Dennison supplies are
recommended. Use non-perforated
supplies in peel mode, butt cut, die cut or
non-indexed.
Supply Types:
Labels, tags, paper
Supply Sizes:
Width in continuous or peel mode: 0.5” to
2.28” (12.7mm to 57.9mm);
Length Cont.: 0.7” to 11.8” (17.8mm to
299mm)
Peel: 0.5” to 11.8” (12.7mm to 299.3mm)
Supply Roll Sizes
2.2” (56mm) OD on a 1” (25.4mm) core
Supply Thickness:
0.0024” – 0.007” (0.06mm - 0.18mm)
Maximum Print Area:
1.89” x 11.8” (48mm x 300mm)
Environmental Ranges
Operating Temperature:
14° to 122° F (-10° C to 50° C)
Storage:
-4° to 140° F (-20° C to 60° C)
Humidity/Operating and Storage:
10% to 90% non-condensing
Electrostatic Discharge and Air Quality:
Some problems with electronic equipment
may occur in environments prone to static
discharge or extreme dust conditions.
Avery Dennison suggests that you take
precautions to minimize these problems.
Performance
Power Source:
7.4v Lithium Ion Battery
Print Ratio:
25% black maximum per square inch (mm)
Inches Per Charge:
Up to 6,000 inches of 25% black printing
at 3.0 IPS (76.2mm/sec) on the supply.
Inches per charge vary according to setup
and usage.
Battery Life Cycle
Approximately 300 full discharge cycles.
Cycle life is approximate. Many factors
affect an individual battery’s performance.
Recommended Duty Cycle
Duty cycle (5 minutes out of 15 15-minutes
time intervals). On -demand or intermittent
printing has no restrictions.
Print Speed
Up to 3 ips (76.2mm/sec)
Communications
Standard:
• USB 2.0
RS 232 – mini din connector
Optional:
Wireless Networking – 802.11 b/g:
WLAN: 802.11b/g; Encryption: WEP 64,
WEP 128, WPA, WPA 2; Authentication
Types: Shared and Open system, TTLS,
PEAP, PSK, EAP-FAST; Authentication
Protocols: PAP, MSCHAP_V2; Remote
printer management
Bluetooth V2.1
Accessories:
Single station battery charger
Four Four-station battery charger
Extra battery
Belt Clip
• Shoulder Strap
Specications subject to change without
notice.
The information contained herein is believed to be reliable but Avery Dennison makes no representations concerning the accuracy or correctness of the data. This product, like any other should be tested by the customer/user thoroughly
under end user conditions to ensure the product meets the particular requirements. Independent results may vary.
Avery Dennison and the logo are registered trademarks of Avery Dennison Corp.
Third party trademarks and/or trade names used herein are the property of their respective owner(s).
© 2012 Avery Dennison Corporation, All Rights Reserved.
E. Europe, Middle East & Africa
TEM Otoyolu Atış Alanı Mevkii,
Tekstilkent Koza Plaza A Blok
Kat: 17–18 34235, Esenler
Istanbul
Turkey
Tel +90 212 467 4000
Fax +90 212 467 4001
Asia
15/F, Octa Tower
8 Lam Chak Street
Kowloon Bay, Kowloon
Hong Kong
Tel +852 3146 8100
Fax +852 2785 1255
Western Europe
Kempische Kaai 7C
3500 Hasselt
Belgium
Tel +32 11 28 77 24
Fax +32 11 28 77 29
Americas
1700 West Park Drive, Suite 400
Westborough, MA 01581
USA
Toll Free +1 800 444 4947
International +1 336 621 2570
Fax +1 336 544 5040