Specifications

Using the Paxar Sierra Sport Configurator 5-5
Configuring the Print Server Settings
Use this tab to configure the server settings.
1. Specify the basic Print Server settings including the System Name,
Location, SNMP Community Name, and Power Level as required.
2. Enable Restart the Network Interface to reinitialize the print server with
the selected settings at the end of the script.
3. Enable Restore Default Configuration to restore all print server
defaults before applying any other configuration settings.
4. Enter the Passwords for Read and Write Access.
5. Enter the Firmware Update File and TFTP Server IP Address if
necessary.
Configuring Services
Use this tab to configure the services for TCP/IP and NetWare.
1. Enter the Service Settings including the Filter, Priority, and TCP Port.
2. Select the Protocol and NetWare Queue Server or Remote Server.
3. Specify the Control Strings for the Beginning and End of Jobs.
Configuring TCP/IP Settings
Use this tab to configure the TCP/IP settings.
1. Enter the various TCP/IP settings including IP Address, Subnet Mask,
Gateway, Boot Method, Boot Tries, and Timeouts as required.
2. Select any LPD or RARP settings.
3. Enter the DNS settings.