TT-830 Bench Scale User’s Manual
EUROPEAN COUNTRIES WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which the user may be required to take adequate measures. CAUTION Risk of electrical shock. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. Weigh-Tronix reserves the right to change specifications at any time. July 2008 830_U.
Table of Contents Table of Contents ..................................................................................... 3 Specifications ............................................................................................ 4 Introduction ............................................................................................... 5 About This Manual .......................................................................... 5 TT-830 Bench Scale ....................................................
Specifications Power Input Operational Keys Operational Annunciators Display Display rate A to D Conversion Rate Unit of Measure Capacity Selections Incremental Selections Displayed Resolution Audio Output Time and Date Internal Resolution Harmonizer™ digital filtering: Standard input and outputs: Available Options Operating Temperatures Dimensions Weight 4 115 Volts AC, 50/60 Hz single phase Optional 230 Volts AC, 50/60 Hz single phase Zero, Tare, Print, Units, Select, Enter, Escape, Clear, 0-9, D
Introduction About This Manual This manual covers the information you need to understand the operation of your Table Top 830 (TT-830) bench scale. Major sections of this manual are headed by titles in a black bar like Introduction above. Subheadings appear in the left column. Instructions and text appear on the right side of the page. Occasionally notes, tips, and special instructions appear in the left column.
Main Display The main display is a 240 x 64 dot matrix LCD display with cold cathode fluorescent backlight. It can display graphics, words and numbers. This flexibility allows graphics and alphanumeric characters to be displayed at the same time. There are 33 displays available on the TT-830. See the Service Manual for all the examples. Your system will be configured for your particular needs. The screen you see will depend on what weighing application you are performing.
Soft Keys Soft keys are so-called because their function is not fixed. Function can change as mode of operations change or as the program for your particular setup changes. Their are five soft keys located directly below the display. If the keys are needed during any operation, a label for each active key appears in the display directly above. There are only five key labels available at one time but this does not limit the potential usefulness of these keys.
Weighing Operation The following instructions step you through a typical weighing operation: 1. Power up the indicator. If the display mode is not the one you want to use, repeatedly press the SELECT key until the display value you want (gross, net, etc.) is displayed. . . 2. Zero the scale by pressing the ZERO key. . . 3. Place object to be weighed on the scale. . . Pushbutton Tare Operation 2. Place container to be tared on the scale and press the TARE key. . . 3.
Specialized Operations Due to the unlimited variety of applications available for the TT-830, it is not practical to describe all the possible specialized operations in this manual. Each application program will be unique. Specialized operations will offer you soft key choices specific to the application and will guide you with messages on the display. Accessing Program Information The time may come when you are asked by a service technician for information about your software program.
Avery Weigh-Tronix USA 1000 Armstrong Dr. Fairmont MN 56031 USA Tel: 507-238-4461 Fax: 507-238-4195 Email: usinfo@awtxglobal.com www.wtxweb.com Avery Weigh-Tronix UK Foundry Lane, Smethwick, West Midlands, England B66 2LP Tel: +44 (0) 8453 66 77 88 Fax: +44 (0)121 224 8183 Email: info@awtxglobal.com www.averyweigh-tronix.com Quartzell® is a registered trademark of Weigh-Tronix Inc.