User`s manual

7
TT-830 Bench Scale User’s Manual
Soft keys are so-called because their function is not fixed. Function can
change as mode of operations change or as the program for your particular
setup changes.
Their are five soft keys located directly below the display. If the keys are
needed during any operation, a label for each active key appears in the
display directly above. There are only five key labels available at one time
but this does not limit the potential usefulness of these keys. Programs can
be created to enable one key to access another level of operation with five
more key names and functions.
After unpacking the scale, place it on a level, stable surface. Plug it into an
appropriate power source. The outlet must be properly grounded and readily
accessible.
A new unit will power up ready to use. This scale is fully programmable. If
you have a custom program resident in your unit, it will power up with that
program active and ready to use.
Since custom programming is possible with this scale, the following pages
only cover basic weighing procedures available when you receive a factory
fresh scale.
To customize your unit you must write a program using the 830 SimPoser
TM
software available from Weigh-Tronix and download it to the scale.
Soft Keys
Installing the TT-830