User`s manual

8
TT-830 Bench Scale User’s Manual
The following instructions step you through a typical weighing operation:
1. Power up the indicator. If the
display mode is not the one you
want to use, repeatedly press
the SELECT key until the display
value you want (gross, net, etc.)
is displayed. . . Your indicator may be configured
with only one display value. Select-
ing other display values may not be
an option with your particular setup.
2. Zero the scale by pressing the
ZERO key. . . Display should read zero weight and
the center of zero symbol is dis-
played.
3. Place object to be weighed on
the scale. . . An M appears on the display during
scale motion and the weight is
displayed.
To perform a tare operation with the TARE key, follow these instructions:
1. Zero the scale by pressing the
ZERO key. . . Display shows zero weight.
2. Place container to be tared on
the scale and press the TARE
key. . . The display changes to a NET
display and shows zero weight.
3. Place material to be weighed on
the scale. . . Net weight is displayed.
For entry of a known tare weight follow these instructions:
1. With the indicator showing gross
weight, key in the tare weight
using the numeric keys. . . A tare entry display shows the
weight that you key in.
2. Press ENTER to accept this tare
entry. . . The net weight is displayed in net
mode.
Weighing Operation
Pushbutton Tare Operation
Keypad Tare Entry