Quick Start Guide

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.ofﬁcestar.net or call or write us.

AME26

December, 2018

AMELIA OFFICE CHAIR

PAGE 1
December, 2018 AME26 AMELIA OFFICE CHAIR Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
PAGE 2
FEATURES (1) (2) • PNEUMATIC SEAT HEIGHT ADJUSTMENT To raise seat remove pressure from seat and pull lever (1) up. To lower seat height sit on chair and pull lever (1) up. NOTE: It is normal for chair to slightly lower under body weight. • LOCKING TILT ADJUSTMENT For individual comfort, this chair has been equipped with an adjustment that will allow the user to change the tension of the tilting feature. Turn knob (2) clockwise to increase tension and counter-clockwise to decrease or ease the tension.
PAGE 3
PARTS (A) Chair Body (1 PC) (B) Seat Plate (1 PC) (C) Pneumatic Cylinder (1 PC) (D) Base (1 PC) (E) Casters (5 PCS) HARDWARE LIST NO DRAWING DESCRIPTION QUANTITY 1 Bolt 4 PCS 2 Lock Washer 4 PCS 3 Flat Washer 4 PCS 4 Allen Wrench 1 PC
PAGE 4
STEP 1 (C) (D) (E) PUSH HARD UNTIL YOU FEEL OR HEAR THE CASTERS (E) SNAP INTO PLACE. STEP 2 (1) (3) (2) (A) (A) (B) (C) FULLY TIGHTEN BOLTS (1). PLACE THE ASSEMBLED SEAT ON TOP OF PNEUMATIC CYLINDER (C) AND APPLY DOWNWARD PRESSURE.