Installation Manual
EZ-SP12H2 Firmware Upgrade Guide Map
Please download SP12H2 firmware file <EZ-SP12H2 update and setting > on easycoolav
com web, then follow up below guide map.
1. Please open Document Video guide > EZ-SP12H2 Firmware Update on PC
2. Then watch above video again and follow it to Open the <PortHelper.exe> to check
which firmware/program should be used.
3. After confirm the program. Please press and hold the <UPDATE> button, then power on
the splitter, it will going to upgrade mode.
Please refer to the video--<operations on splitter> to learn how to go into upgrade mode.
4. After the device is recognized, OPEN and select correctly firmware file at below
Document.
Please check EZ-SP12H2 Firmware Release List firstly, and select correct firmware based on
your demand.
Any question, please get factory technical support on easycoolav web freely, or ezcoousa
at hot mail..