User manual

A V G 9.0 A nti-V irus Busines s E dition © 200 9 C opyright A V G Tec hnologies C Z, s.r.o. A ll rights reserved. 23 4
You will be prompted to enter an username, under which the Firebird Server is
running (default is firebird) and database owner (default is SYSDBA)with
password (default is masterkey, but we strongly recommend to use a custom
one).
8. Start AVG Admin Server
Use the following command to start the AVG Admin Server:
# /etc/init.d/avgadmsrvd start
15.1.4. License
Without registration with a valid license number you will not be able to connect to
DataCenter or perform updates over the HTTP protocol using AVG Admin Server 9.0 for
Linux Beta in your local network.
If you want to use this feature, please register this product with a valid license
number for AVG 9.0 Anti-Virus Business Edition. To register, use the following command
(replace the sample license number with a real one):
# avgadmsrv --register 9ISMB-AX9VD-PXC4X-4X4D4-ABSRV-ZUMMY-1PLN
To obtain the license number contact either your AVG reseller or visit http://www.avg.
com.
15.1.5. AVG Admin Server 9.0 for Linux Beta Configuration
If you require to change some default settings, you can do so in the configuration file.
You can open the configuration file avgadmsrv.conf from the following location:
/opt/avg/avgadmsrv/etc/avgadmsrv.conf
You should restart the AVG Admin Server after each change. To restart the server use
the following command:
# /etc/init.d/avgadmsrvd restart
You can find detailed configuration description in the Configuration chapter below.
15.1.6. Installation Verification
To test the installation try connecting to your AVG Admin Server 9.0 for Linux Beta
from AVG stations or from the AVG Admin Console. Use the connection string in the
following format:
http://host[:port]