3.0

Table Of Contents
Installing the DekoMOS Gateway
103
Installing the DekoMOS Gateway
The Net HASP dongle, supplied by Avid, as well as the HASP License software and driver
are part of the DekoMOS Gateway installation. Therefore, installing the DekoMOS Gateway
is three-fold:
Connecting the Net HASP Dongle
Installing the DekoMOS Gateway and Net HASP Software
Confirming the NetHASP License Manager Configuration
n
For thumbnails of Deko graphics to appear in Command, the DekoMOS Gateway must be in
the same domain as the Command Server(s).
The DekoMOS Gateway cannot be installed on the iNEWS Gateway or ENPS Server. Avid
recommends installing the DekoMOS Gateway on the Command Server. However, if it’s
installed on another computer, the selected computer must have a network connection to the
Deko and should be running Windows 2003 Server operating system, not Windows XP.
Otherwise, because of Windows limitations, the number of clients allowed to connect
simultaneously is limited to ten.
Connecting the Net HASP Dongle
The Net HASP dongle included with your Deko system should be connected to the computer
where you will install the DekoMOS Gateway software.
To connect the Net HASP Dongle:
t Connect the dongle to either the parallel port or one of the USB ports on the back of
the machine. The Net HASP dongle enables the Deko Select option for the newsroom
workstations.
The Net HASP License Manager, the driver for the Net HASP, installs automatically with
the DekoMOS Gateway software.
Installing the DekoMOS Gateway and Net HASP Software
To install the DekoMOS Gateway on a dedicated computer:
1. Insert the Deko Select installation CD in the computer’s CD-ROM drive (or access the
program from the network).
2. Navigate to and run the
DekoMOSGateway.exe
install program.
3. Click OK and follow the instructions on the screen to install the software.