3.0
Table Of Contents
- Avid iNEWS Command Installation and Configuration Guide
- Contents
- Using This Guide
- Installing and Configuring the Command Server
- System Architecture
- Checklist: Before you Begin
- Checklist: Command Server Installation
- Copying Install CD to Local Directory
- Installing Avid Service Framework
- Installing the License Service
- Installing Avid iNEWS Command on the Server
- Configuring the iNEWS Command Server
- Configuring a Second Command System
- Installing and Configuring the AirSpeed Video Servers
- Checklist: Installing the AirSpeed Video Server
- Installing Avid Service Framework
- Installing AirSpeed Multi Stream Device Services
- Checklist: Configuring the AirSpeed Video Server
- Configuring Properties for Interplay Workgroup
- Configuring the AirSpeed Multi Stream Device Service
- Configuring Properties for Command Workgroup
- Working with Play While Record
- AirSpeed Multi Stream Los-Res Proxy Viewer
- Installing and Configuring the Deko
- System Architecture
- Checklist: Installing the Deko
- Installing Avid Service Framework
- Installing Avid Deko Device Service
- Installing the DekoMOS Gateway
- Installing the DekoMOS Macro Server
- Checklist: Configuring the Deko
- Configuring the DekoMOS Gateway
- Configuring the DekoMOS Macro Server
- Configuring Avid Workgroup Properties
- Configuring the Deko Device Service
- Configuring the Avid Deko Renderer Service
- Creating Graphic Styles in Command
- Installing and Configuring the Graphic Device Service
- Installing Avid Service Framework
- Installing Avid Graphic Device Service
- Installing Third-Party Plug-ins for the Graphic Device Service
- CII Integration
- Installing and Configuring the Thunder
- Installing the Command Workstation
- Installing and Configuring the Tablet Application
- Configuring Playout Control
- Controling Playout via the Keyboard
- Disabling a Command Workstation’s Keyboard
- Checklist: Setting up an X-keys USB Keypad
- Installing an X-keys USB Keypad
- Mapping Indices to Channel Names
- Programming the X-keys
- Setting up the Playout Panel for Touch Screens
- Checklist: Setting up the GPI Panel
- Configuring the GPI Card
- Restarting the GPI Device Service
- Confirming Successful Setup of a GPI Panel
- Mapping Events to Actions for a GPI Panel
- Enabling the GPI Panel
- Configuring GPI Out
- Integrating with Avid iNEWS
- Integrating with ENPS
- Configuring the Perle IOLAN Server
- Confirming Functionality
- Index
3 Installing and Configuring the Deko
106
Configuring the DekoMOS Gateway
Templates exist on both the DekoMOS Gateway and the Deko device. The DekoMOS
Gateway is then used to supply thumbnail graphics and handle file requests from plug-ins at
multiple workstations, thus relieving such burden from the actual device that might be busy
during playout. Duplication of assets on the gateway and device is not automatic; therefore,
it must be maintained manually.
After the DekoMOS Gateway is installed, you need to configure various settings in the
software. This section covers only those settings that directly impact integration with
Command.
n
For more information on how to configure the DekoMOS Gateway and for further
explanation of the settings available for configuration that are not covered in this book, see
the Avid Deko Select Installation and User’s Guide.
To configure the DekoMOS Gateway:
1. Determine if the DekoMOS Gateway is running.
- If the DekoMOS Gateway is not running, click the Start button and select
Programs > Avid Systems > DekoMOS > DekoMOS Gateway.
- If the DekoMOS Gateway is running, maximize the window by right-clicking on
the icon (shown below next to the clock) in the taskbar’s system tray.
2. If you have not previously configured DekoMOS Gateway, or if it is missing any
required information, the DekoMOS Gateway Configuration dialog box will
automatically open when the application starts.
If it does not open, do one of the following:
t Click the Configure button.
t Press Alt+C.