3.0
Table Of Contents
- Avid iNEWS Command Installation and Configuration Guide
- Contents
- Using This Guide
- Installing and Configuring the Command Server
- System Architecture
- Checklist: Before you Begin
- Checklist: Command Server Installation
- Copying Install CD to Local Directory
- Installing Avid Service Framework
- Installing the License Service
- Installing Avid iNEWS Command on the Server
- Configuring the iNEWS Command Server
- Configuring a Second Command System
- Installing and Configuring the AirSpeed Video Servers
- Checklist: Installing the AirSpeed Video Server
- Installing Avid Service Framework
- Installing AirSpeed Multi Stream Device Services
- Checklist: Configuring the AirSpeed Video Server
- Configuring Properties for Interplay Workgroup
- Configuring the AirSpeed Multi Stream Device Service
- Configuring Properties for Command Workgroup
- Working with Play While Record
- AirSpeed Multi Stream Los-Res Proxy Viewer
- Installing and Configuring the Deko
- System Architecture
- Checklist: Installing the Deko
- Installing Avid Service Framework
- Installing Avid Deko Device Service
- Installing the DekoMOS Gateway
- Installing the DekoMOS Macro Server
- Checklist: Configuring the Deko
- Configuring the DekoMOS Gateway
- Configuring the DekoMOS Macro Server
- Configuring Avid Workgroup Properties
- Configuring the Deko Device Service
- Configuring the Avid Deko Renderer Service
- Creating Graphic Styles in Command
- Installing and Configuring the Graphic Device Service
- Installing Avid Service Framework
- Installing Avid Graphic Device Service
- Installing Third-Party Plug-ins for the Graphic Device Service
- CII Integration
- Installing and Configuring the Thunder
- Installing the Command Workstation
- Installing and Configuring the Tablet Application
- Configuring Playout Control
- Controling Playout via the Keyboard
- Disabling a Command Workstation’s Keyboard
- Checklist: Setting up an X-keys USB Keypad
- Installing an X-keys USB Keypad
- Mapping Indices to Channel Names
- Programming the X-keys
- Setting up the Playout Panel for Touch Screens
- Checklist: Setting up the GPI Panel
- Configuring the GPI Card
- Restarting the GPI Device Service
- Confirming Successful Setup of a GPI Panel
- Mapping Events to Actions for a GPI Panel
- Enabling the GPI Panel
- Configuring GPI Out
- Integrating with Avid iNEWS
- Integrating with ENPS
- Configuring the Perle IOLAN Server
- Confirming Functionality
- Index
3 Installing and Configuring the Deko
120
Configuring the Avid Deko Renderer Service
The Avid Deko Renderer service is installed at sites that want to integrate with an Avid Deko
and utilize thumbnail images. After the service is installed on the Command Server,
additional configuration should not be necessary. By default, this service is pre-configured to
automatically locate the DekoMOS Gateway on the network. However, if the service was
installed and cannot locate the DekoMOS Gateway, you can manually configure it to do so
via the Avid Service Configuration application.
n
The Deko Renderer service does not take up a HASP license seat.
To configure Deko Renderer services:
1. Click the Start button, and then select All Programs > Avid > Service Framework > Avid
Service Configuration.
2. On the Hosts tab, navigate to and select the Avid Deko Renderer Service.
3. When prompted, enter the system administrator password and click OK. If you have not
yet created one, leave the space blank and click OK.
4. If the Allow Unrestricted Security dialog box appears, click Yes.
On the Settings tab, you’ll see the service set to Automatically.