3.0

Programming the X-keys
219
n
Some sites might use key caps that cover 2 or 4 buttons on the keypad, turning a set of
buttons into a single key. If that is the case, select the left box to set the “2-button” key. For
4-button keys, select the upper left box.
7. Assign an action to the key by selecting it from the list of those available in the Choose
Action dialog box. The most commonly used actions will appear open for your selection
already.
- The Playlist > Channel Group actions refer to channel group commands, such as
lock, unlock, and assign channel.
- The Playlist > Selection actions refer to selected items on the playlist, such as play
selection, cue selection, stop selection, and move up/down.
- The Control actions refer to channel-specific actions that correspond to a particular
index as configured when mapping indices to channel names. An example of this
would be for a key to initiate a play command on a single channel. Assigning the
channel-specific actions affects only the keypad attached to the workstation at
which the assignments are programmed.
8. Click OK.
9. Repeat steps 5-7 as needed.
10. Click Apply.
11. Click OK.