3.0

Enabling the GPI Panel
235
Enabling the GPI Panel
The GPI panel must be enabled to control a playlist if used for non-channel-specific,
selection-based actions that go through the Command user interface.
n
This procedure does not apply to GPI panels (or Maney panels) with events mapped only to
actions chosen in GPI > Control—such as Cue, Pause, Play, or Stop—because those are sent
directly to the Playlist Controller and do not go through the user interface.
A user can enable a panel at any Command Workstation.
To enable a GPI panel to control a playlist:
1. At the Command Workstation, select Tools > Options.
2. In Category, expand Actions and select GPI.
3. Select a GPI panel from the list.
4. Click Apply.
5. Click OK.