3.0
Table Of Contents
- Avid iNEWS Command Installation and Configuration Guide
- Contents
- Using This Guide
- Installing and Configuring the Command Server
- System Architecture
- Checklist: Before you Begin
- Checklist: Command Server Installation
- Copying Install CD to Local Directory
- Installing Avid Service Framework
- Installing the License Service
- Installing Avid iNEWS Command on the Server
- Configuring the iNEWS Command Server
- Configuring a Second Command System
- Installing and Configuring the AirSpeed Video Servers
- Checklist: Installing the AirSpeed Video Server
- Installing Avid Service Framework
- Installing AirSpeed Multi Stream Device Services
- Checklist: Configuring the AirSpeed Video Server
- Configuring Properties for Interplay Workgroup
- Configuring the AirSpeed Multi Stream Device Service
- Configuring Properties for Command Workgroup
- Working with Play While Record
- AirSpeed Multi Stream Los-Res Proxy Viewer
- Installing and Configuring the Deko
- System Architecture
- Checklist: Installing the Deko
- Installing Avid Service Framework
- Installing Avid Deko Device Service
- Installing the DekoMOS Gateway
- Installing the DekoMOS Macro Server
- Checklist: Configuring the Deko
- Configuring the DekoMOS Gateway
- Configuring the DekoMOS Macro Server
- Configuring Avid Workgroup Properties
- Configuring the Deko Device Service
- Configuring the Avid Deko Renderer Service
- Creating Graphic Styles in Command
- Installing and Configuring the Graphic Device Service
- Installing Avid Service Framework
- Installing Avid Graphic Device Service
- Installing Third-Party Plug-ins for the Graphic Device Service
- CII Integration
- Installing and Configuring the Thunder
- Installing the Command Workstation
- Installing and Configuring the Tablet Application
- Configuring Playout Control
- Controling Playout via the Keyboard
- Disabling a Command Workstation’s Keyboard
- Checklist: Setting up an X-keys USB Keypad
- Installing an X-keys USB Keypad
- Mapping Indices to Channel Names
- Programming the X-keys
- Setting up the Playout Panel for Touch Screens
- Checklist: Setting up the GPI Panel
- Configuring the GPI Card
- Restarting the GPI Device Service
- Confirming Successful Setup of a GPI Panel
- Mapping Events to Actions for a GPI Panel
- Enabling the GPI Panel
- Configuring GPI Out
- Integrating with Avid iNEWS
- Integrating with ENPS
- Configuring the Perle IOLAN Server
- Confirming Functionality
- Index
9 Integrating with Avid iNEWS
252
Using the list Command to View Assigned Mailboxes
Variations of the list command can be used at the console to determine mailbox assignments
for specific devices, queues, and so forth.
Since multiple queues can share the same mailbox, you can list all queues and directories in
the database that are using a certain mailbox, such as 267, by typing:
list mailbox=267 d
To find out which monitor server mailboxes are assigned:
t Type:
list c monitor
The system displays configuration information for your system’s monitor servers,
similar to the following:
The mailbox number assigned to each monitor server appears in the PRINTER column
and begins with the letter, N.
To see if any servers are assigned a certain mailbox number:
t Use the following format:
list mailbox=<mailbox number> c
To check whether mailbox 267 is assigned to a server program:
t Type:
list mailbox=267 c
Two rundowns queues can share the same mailbox, but they should never be monitored
simultaneously.
c
If two rundowns share the same mailbox number, ensure that both their monitor
servers do not run simultaneously; otherwise, results could be unpredictable.
DEV DEVICE_TYPE COMPUTER CCU PRINTER SPEED OPTIONS DEVNAME
S264 monitor A N264
S265 monitor B N265
S266 monitor A N266
S267 monitor B N267
NRCS-A
$