3.0

Configuring Command for MOS Redirection
269
n
For more information, see documentation provided by ENPS.
2. Configure the Deko channel group in Command.
3. In the DekoMOS Gateway, add the primary ENPS Server’s MOS ID field, shown here
with MOS ID per channel:
Configuring Command for MOS Redirection
Command sites that interface with the ENPS newsroom computer system can run two MOS
Communication services and set the second one to have a different MOSID so that MOS
redirection can be used to send playlists to the backup server. The purpose of MOS
redirection to allow users to load the ENPS rundown to the backup Command Server in the
event of a primary server failure. It is the equivalent of loading an iNEWS rundown to the
backup server, but this workflow requires a little more configuration.
To configure Command for MOS redirection:
1. In ENPS, configure the primary and backup Command MOS IDs.
2. Click the Start button and select Programs > Avid > Service Framework > Avid Service
Configuration.
3. On the Hosts tab, navigate to and select the Avid MOS Communication Service running
on the backup server.
4. Enter the MOSID for the backup server.
5. Click Apply.