3.0
Table Of Contents
- Avid iNEWS Command Installation and Configuration Guide
- Contents
- Using This Guide
- Installing and Configuring the Command Server
- System Architecture
- Checklist: Before you Begin
- Checklist: Command Server Installation
- Copying Install CD to Local Directory
- Installing Avid Service Framework
- Installing the License Service
- Installing Avid iNEWS Command on the Server
- Configuring the iNEWS Command Server
- Configuring a Second Command System
- Installing and Configuring the AirSpeed Video Servers
- Checklist: Installing the AirSpeed Video Server
- Installing Avid Service Framework
- Installing AirSpeed Multi Stream Device Services
- Checklist: Configuring the AirSpeed Video Server
- Configuring Properties for Interplay Workgroup
- Configuring the AirSpeed Multi Stream Device Service
- Configuring Properties for Command Workgroup
- Working with Play While Record
- AirSpeed Multi Stream Los-Res Proxy Viewer
- Installing and Configuring the Deko
- System Architecture
- Checklist: Installing the Deko
- Installing Avid Service Framework
- Installing Avid Deko Device Service
- Installing the DekoMOS Gateway
- Installing the DekoMOS Macro Server
- Checklist: Configuring the Deko
- Configuring the DekoMOS Gateway
- Configuring the DekoMOS Macro Server
- Configuring Avid Workgroup Properties
- Configuring the Deko Device Service
- Configuring the Avid Deko Renderer Service
- Creating Graphic Styles in Command
- Installing and Configuring the Graphic Device Service
- Installing Avid Service Framework
- Installing Avid Graphic Device Service
- Installing Third-Party Plug-ins for the Graphic Device Service
- CII Integration
- Installing and Configuring the Thunder
- Installing the Command Workstation
- Installing and Configuring the Tablet Application
- Configuring Playout Control
- Controling Playout via the Keyboard
- Disabling a Command Workstation’s Keyboard
- Checklist: Setting up an X-keys USB Keypad
- Installing an X-keys USB Keypad
- Mapping Indices to Channel Names
- Programming the X-keys
- Setting up the Playout Panel for Touch Screens
- Checklist: Setting up the GPI Panel
- Configuring the GPI Card
- Restarting the GPI Device Service
- Confirming Successful Setup of a GPI Panel
- Mapping Events to Actions for a GPI Panel
- Enabling the GPI Panel
- Configuring GPI Out
- Integrating with Avid iNEWS
- Integrating with ENPS
- Configuring the Perle IOLAN Server
- Confirming Functionality
- Index
1 Installing and Configuring the Command Server
68
To configure the AirSpeed device services:
1. Click the Start button, and then select All Programs > Avid > Service Framework > Avid
Service Configuration.
2. On the Hosts tab, navigate to and select the AirSpeed Device Service.
3. When prompted, enter the system administrator password and click OK. If you have not
yet created one, leave the space blank and click OK.
4. On the Device Settings tab, enter the device name for the respective device.
5. Click Apply. You can then close the Avid Service Configuration application.
6. Click the Start button, and then select All Programs > Avid > Service Framework > Avid
Workgroup Properties.
7. Click the Advanced button.
8. After the Avid Services dialog box opens, select the device, then stop and restart it.
n
For Command upgrades, the AirSpeed device server hostname might revert back to the local
server host name and must be reset, using the Avid Service Configuration application.
To configure the AirSpeed Control Configurations:
1. On the AirSpeed, select Setup > Channels.
2. Set Control Configurations to Local/Network Record or Play. It is the only
configuration supported with Command.
n
Avid recommends that you do not use VDCP to control AirSpeed video servers.Unrestricted
VDCP is not supported for on-air broadcasting.