3.0
Table Of Contents
- Avid iNEWS Command Installation and Configuration Guide
- Contents
- Using This Guide
- Installing and Configuring the Command Server
- System Architecture
- Checklist: Before you Begin
- Checklist: Command Server Installation
- Copying Install CD to Local Directory
- Installing Avid Service Framework
- Installing the License Service
- Installing Avid iNEWS Command on the Server
- Configuring the iNEWS Command Server
- Configuring a Second Command System
- Installing and Configuring the AirSpeed Video Servers
- Checklist: Installing the AirSpeed Video Server
- Installing Avid Service Framework
- Installing AirSpeed Multi Stream Device Services
- Checklist: Configuring the AirSpeed Video Server
- Configuring Properties for Interplay Workgroup
- Configuring the AirSpeed Multi Stream Device Service
- Configuring Properties for Command Workgroup
- Working with Play While Record
- AirSpeed Multi Stream Los-Res Proxy Viewer
- Installing and Configuring the Deko
- System Architecture
- Checklist: Installing the Deko
- Installing Avid Service Framework
- Installing Avid Deko Device Service
- Installing the DekoMOS Gateway
- Installing the DekoMOS Macro Server
- Checklist: Configuring the Deko
- Configuring the DekoMOS Gateway
- Configuring the DekoMOS Macro Server
- Configuring Avid Workgroup Properties
- Configuring the Deko Device Service
- Configuring the Avid Deko Renderer Service
- Creating Graphic Styles in Command
- Installing and Configuring the Graphic Device Service
- Installing Avid Service Framework
- Installing Avid Graphic Device Service
- Installing Third-Party Plug-ins for the Graphic Device Service
- CII Integration
- Installing and Configuring the Thunder
- Installing the Command Workstation
- Installing and Configuring the Tablet Application
- Configuring Playout Control
- Controling Playout via the Keyboard
- Disabling a Command Workstation’s Keyboard
- Checklist: Setting up an X-keys USB Keypad
- Installing an X-keys USB Keypad
- Mapping Indices to Channel Names
- Programming the X-keys
- Setting up the Playout Panel for Touch Screens
- Checklist: Setting up the GPI Panel
- Configuring the GPI Card
- Restarting the GPI Device Service
- Confirming Successful Setup of a GPI Panel
- Mapping Events to Actions for a GPI Panel
- Enabling the GPI Panel
- Configuring GPI Out
- Integrating with Avid iNEWS
- Integrating with ENPS
- Configuring the Perle IOLAN Server
- Confirming Functionality
- Index
Working with Play While Record
85
Working with Play While Record
This section provides additional information to help clarify the existing Play While Record
feature when used with an AirSpeed video server, such as AirSpeed 5000 or AirSpeed Multi
Stream.
After an item starts recording on the video server, it appears within the Command Inventory
Panel within approximately 10 seconds. When it appears in Command, users can open the
item in the Media Viewer to adjust the Mark In point, and then play the item.
n
This requires an available playback channel on the video server that is recording the item. A
Mark Out point is not required, only a Mark In timecode.
To set the Mark In point for an item that is recording, it needs to be added to a Command
playlist (via ENPS, iNEWS, or a Standalone playlist). Once there and available, you can
double-click the item and type the Mark In point.
If you want to open the item in the Media Viewer and use the Jog to set the Mark In point,
you have to configure a Browse channel as part of the Command playlist. It can either be a
Browse channel that is part of the Playback channel group—such as, Channels AB for
playback and C for browse—or with Command v2.6, you can configure a Playback channel
group (AB) and a separate Browse-only group (C). The Browse-only channel group also
needs to be added to the playlist.
To play while record on an AirSpeed video server:
1. Configure an AirSpeed video server so that it has a record and playback channel. This
means that the AMS Device Service needs to be part of the Command workgroup, and
the playback channel needs to be in a Command channel group.
2. After the item starts recording, it should appear in Command's inventory within
approximately 10 seconds.
3. After the item is available, it can be played at any time. The countdown clock time will
be erratic, because the duration is being updated while the item is playing.
4. When the recording is stopped, the total time code gets updated one last time, Command
then stops at the recording's stopping point, and then follows the Command hold last
frame setting.
To play while record with Avid iNEWS:
1. Add the item’s ID to the Video ID column of the iNEWS playlist and load the show.
2. Start recording the item on the video server, using the Video ID that you entered in the
iNEWS playlist.