3.3

158
startup
startup
Starts the system’s devices after they have been shut down. The system must be offline and
all devices must be stopped.
status
status [all | license]
Displays system connection information: which server is the master, if system is running
single or dual, and the disk status.
There are three disk statuses:
• OK - When the system is up and running either as dual or single.
• Cleared - When you have cleared the database of a failed server.
• Unknown - When you reconnect the CPUs following a
diskclear. When the diskcopy procedure has completed and the database has been
mirrored, the disk status will change back to OK.
To list basic system information, type:
status
siterestore Command Options
-d <device> is the name of a tape device. The actual device name used will be /dev/<device>.
The default is /dev/tape.
-f <file> is the name of a file to use as the archive.
-e Eject tape when done.
-h Help - show usage information.
-t Show table of contents; no files are restored.
-v Verbose
<file> ... Only the named files are restored. If a directory is specified, all files in the directory will
be restored.