3.3

Console Connect Sessions
33
If you modified an existing service or added a service that uses an existing network
resource, you did not make any changes to your system’s configuration file. So, you
need to have the system note only changes made to the service table by typing the
following:
NRCS-A# configure -s
8. When the prompt returns, type what appears in bold text:
NRCS-A # online
9. Exit superuser mode by holding the Control key (Ctrl) down and typing the letter D. A
message similar to the following will appear:
A Tue Oct 5 00:18:58 2000 msg System being configured
When you see the system prompt, the network service you created and its resource you
added (if any) is ready for use.
10. (Optional) Back up site files.
If you have made significant changes, back up your site files with the
sitedump console
command.
Console Connect Sessions
To connect to the console from an iNEWS Workstation—that is, after the network
remote connect service and its resources are set up—do the following:
1. Log in to any iNEWS Workstation, with a user account allowed to use the Connect to
Service feature.
2. Select Communicate > Connect to Service. The Connect to Service dialog box will
appear, offering you a list of services.
As shown in this example, two options are provided to connect to the console—each
option corresponding to a different iNEWS Server.