2.4

3 Interplay Transfer Configuration
68
To remove a remote workgroup from the accessible list:
1. Click the name of the remote workgroup in the list.
2. Click Remove.
Specifying Interplay Transfer Engines For Direct
Transfers
You can specify the source and target Interplay Transfer Engines used during a
workgroup-to-workgroup transfer of Avid assets. Prior to v1.5, the transfer was handled by
any available Interplay Transfer Engine configured in the workgroup. Transfer presets let
you specify which Interplay Transfer Engines are used during a workgroup-to-workgroup
transfer.
The direct transfer feature is useful if you need to identify specific hosts and specific users
that should perform transfers. For example, performing a direct transfer from your broadcast
facility to a remote site covering a sporting event in a different country.
When creating a transfer preset you can specify the local (also known as source or sending)
Interplay Transfer Engines and remote (also known as target or receiving) Interplay Transfer
Engines that you want to handle the transfer. After you configure the workgroup and transfer
settings, you can use Avid Interplay Access to select the preset from the Send to Workgroup
dialog box to perform the direct transfer.
You can perform direct transfers from Avid Instinct and Avid Interplay Assist using an
AutoTransfer folder that is configured with a direct transfer preset. For more information
about AutoTransfer folders, see “Automatically Transferring Assets to Another Workgroup”
on page 120.