4.7
Table Of Contents
- Avid® ISIS® | 5500 - 5000 Setup Guide
- Contents
- Chapter 1 Avid ISIS | 5500 Overview 13
- Chapter 2 Installing the Avid ISIS System 27
- Chapter 3 Installing the Avid ISIS Software 63
- Chapter 4 Avid ISIS Software Licensing 81
- Chapter 5 Configuring System Director Resiliency 88
- Chapter 6 Preupgrade Information 101
- Chapter 7 Avid ISIS Upgrade Guidelines 105
- Chapter 8 Adding and Replacing Hardware 113
- Chapter 9 Optional Network Adapter Boards 128
- Chapter 10 Product Recovery 133
- Chapter A Specifications and Notices 137
- Appendix B Safety and Regulatory Information 142
- Using This Guide
- Avid ISIS | 5500 Overview
- Installing the Avid ISIS System
- Avid ISIS Hardware
- Installing Avid ISIS Hardware in a Rack
- Rack-mount Requirements
- Positioning the Avid ISIS Engine in the Rack
- Separating the Slide Rails
- Attaching Inner Slide Rails to the Avid ISIS | 5500
- Attaching the Outer Rails to a Square-Hole Rack
- Attaching the Outer Rails to a Round-Hole Rack
- Securing the Avid ISIS | 5500 in a Rack
- Installing the Dell Networking S25 and S4810 Switches in a Rack
- Installing the Dell Networking S60 Switch in a Rack
- Installing the Avid ISIS Drives
- Connecting a Keyboard, Monitor, and Mouse
- Connecting Power Cords
- Configuration Considerations
- Connecting Clients Directly to the System Director
- System Director 1 Gb Ethernet Connections to the Switch
- Dell Networking Ethernet Switches
- Connecting Multiple Engines to the Stacked Switch
- Connecting to an In-House Network
- Turning On the Avid ISIS | 5500 Hardware
- Installing the Avid ISIS Software
- Windows Operating System and Network Settings
- Software Installation
- Connect the Network Cables to the Enclosure
- IP Addressing Strategies When Connecting to a Network
- Loading the Software
- Activating the License Key
- Connecting the Optional Application Key
- Creating an Active File System
- Checking or Changing the System Director IP Addresses
- Accessing the Management Console From Any Computer
- Binding the Storage Managers
- Creating a Storage Group
- Creating Workspaces
- Creating User Accounts
- Avid ISIS Software Licensing
- Configuring System Director Resiliency
- Preupgrade Information
- Avid ISIS Upgrade Guidelines
- Adding and Replacing Hardware
- Optional Network Adapter Boards
- Product Recovery
- Specifications and Notices
- Safety and Regulatory Information
- Warnings and Cautions
- Proposition 65 Warning
- FCC Notice
- Canadian Notice (Avis Canadien)
- LED Safety Notices
- European Union Declaration of Conformity
- Disposal of Waste Equipment by Users in the European Union
- Argentina Conformity
- Australia and New Zealand EMC Regulations
- Japan EMC Regulations
- Korean EMC Regulations
- Taiwan EMC Regulations
- Index
Taiwan EMC Regulations
152
11. Warning to service persons
Suitable markings shall be provided on the equipment or a statement shall be provided in the
servicing instructions to alert a SERVICE PERSON to a possible hazard, where both of the
following conditions exist:
- Where a fuse is used in the neutral of single-phase equipment either permanently
connected or provided with a non-reversible plug
- Where, after operation of the fuse, parts of the equipment that remain energized might
represent a hazard during servicing
The following or similar wording is regarded as suitable: