4.7

3 Installing the Avid ISIS Software
This chapter describes network and Windows operating system parameters that need setting
along with instructions creating workspaces using the Avid ISIS software on the Avid ISIS.
Windows Operating System and Network Settings
Your Avid ISIS ships with the Windows operating system installed. If you need to re-image the
internal drives with the Windows operating system see
“Product Recovery” on page 133.
When turning on your Avid ISIS for the first time the Apply Computer Setup message is
displayed for 3 to 5 minutes. Use the information in the following sections to configure the Avid
ISIS with the correct date and time, computer name, and network properties.
n
Log on as Administrator (default password: is-admin).
Setting the Date, Time, and Time Zone
You need to correctly set the date, time, time zone, and daylight saving time option on each Avid
ISIS enclosure.
To set the date, time, time zone, and daylight saving time option on the Avid ISIS:
1. Click the time in the taskbar. The Date/Time Properties dialog box opens.
2. Click “Change date and time settings.”
3. In the Date and Time tab, click the “Change date and time” button. Set the date and time
using the Date & Time tab.
4. Set the date and time.
5. Click OK to close the Date and Time Settings dialog box.
6. Click the “Change time zone” button.
7. Set the time zone for the location of the Avid ISIS.
8. Make sure the “Automatically adjust clock for Daylight Saving Time” option is selected if
your location observes daylight saving time.
9. Click OK to close the Time Zone Settings dialog box.