7.0

62
STUDIO
LIQUID
No comparable function. Logging “on the fly”
1 Start tape playback. Click the Log button
once to set a mark-in.
2 At the end of the scene click the Log but-
ton once again to set the mark-out and
transfer the clip to the Rack.
... and so on ...
Digitizing (recording) “on the fly”
1 Start tape playback. Click the Digitize
button to set a mark-in.
The system transfers the clip to the hard
disk.
2 At the end of the scene click the Digitize
button once again to set the mark-out
and transfer the clip to the Rack.
... and so on ...
Do not click the “X” to finish the capture or log-
ging process: this discards the current clip, mark-
in and mark-out are cleared.
4 Recording or Logging Clips “on the Fly”
With this method, mark-ins and mark-outs are set while the tape is running or recording (Capture) is in
progress.