7.1

134
Chapter 6 Input
Properties
This button (upper right-hand corner next to Rack drop-down list box) opens the Properties menu.
Some of the options described below are also relevant for the Batch Digitize module.
(The menu also offers direct access to the System Settings dialog.)
General Settings
Open/Close/Change Reel Section
Open Select Reel dialog on entering Logging Tool
If this option is activated, the Select Reel dialog box (page 120) is displayed automatically each time you
open the Logging Tool.
Stop attached player when Logging Tool is closed
If this option is activated when you close the Logging Tool, a stop command is issued to the player.
Start Logging Tool with last selected Rack
If this option is selected, the Logging Tool is opened with the last Rack selected. This allows you to begin
storing logged/digitized clips without making any other selections.
Keep Color Correction/Audio when changing the Reel
This option ensures that Color Correction values and the Playback Level are retained each time the Reel is
changed.
Activate TC Shift mode
If this option is activated, the Select Reel dialog box contains a timecode field in which you can enter the
desired shift.
DEVICE Section
Stop attached player after Open End capture
Stops the player the next time you click Digitize, effectively terminating the capture process.
Capture device to Stdby Off if not used
This option reduces wear on the tape and video heads.