7.1

846
Chapter 14 Audio
Configuring the Mixer for a Surround Mix
Open the Audio Editor. If you already configured the Timeline Tracks as described above and activated
Audio Playback for each, you should see at least five Fader Units.
Open the Bus Type section. For each fader, select Surround 5.1on the top line as the bus type and select
Mono on the bottom line as the track type. The Mixer should now look something like this:
Audio Mixer prepared for a surround mix
The surround 5.1 bus fader with its level meter for the six surround channels appears on the right
Let’s take a closer look at the Surround Panner:
Bus type
Track type
Surround panner
LFE fader
Signal
location
Listener
position
Front/rear slider
Left/right slider
Surround
space